590.540.810.900 Steep Taper (DIN) 40 (DIN 69871) Gauge Retention Knobs

Steep Taper (DIN) 40 (DIN 69871) Gauge Retention Knobs

Retention knobs / pull studs for DIN 69871 Standard gauges

Use a DIN 69871 Standard gauge/taper in steep taper spindles.

Steep Taper (DIN) 40 (DIN 69871) Gauge Retention Knobs (Click image to enlarge)

Product	Accessory
Part Type	Retention Knob
Taper / Standard	Steep Taper (DIN)
Taper Size	40
Angle (G)	15 deg.
Length (B)	20
Thread	5/8"-11
Type / Adapter Knob	CAT 40 Gauge >> DIN 40 Spindle

Spindle Taper	Length (B)	Angle (G)	Thread	Type / Adapter Knob	Part Number
Steep Taper (DIN) 30	19	15 deg.	M12	DIN 69871	590.530.810.800
Steep Taper (DIN) 30	19	15 deg.	1/2'-13	CAT 30 Gauge >> DIN 30 Spindle	590.530.810.900
Steep Taper (DIN) 40	20	15 deg.	M16	DIN 69871	590.540.810.800
Steep Taper (DIN) 40	20	15 deg.	5/8"-11	CAT 40 Gauge >> DIN 40 Spindle	590.540.810.900
Steep Taper (DIN) 40	23	15 deg.	M16	BT 40 Gauge >> DIN 40 Spindle	590.540.811.700-23mm
Steep Taper (DIN) 50	25	15 deg.	M24	DIN 68871	590.550.810.800
Steep Taper (DIN) 50	25	15 deg.	1"-8	CAT 50 Gauge >> DIN 50 Spindle	590.550.810.900
Steep Taper (DIN) 60	30	15 deg.	M30	DIN 69871	590.560.811.800

For more information regarding this item (Steep Taper (DIN) 40 (DIN 69871) Gauge Retention Knobs) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Steep Taper (DIN 69871) Gauge Retention Knobs

Use a DIN 69871 Standard gauge/taper in steep taper spindles.

Steep Taper Retention Knobs

Pull Studs / Retention Knobs

High-precision retention knobs are available for use with BERG steep taper grippers.

Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters

For tools with Steep Taper DIN 2080, DIN 69871, or MAS 403 BT.

Steep Taper (MAS 403 BT) to Steep Taper (ISO) Reducing Adapters

For tools with Steep Taper DIN 2080, DIN 69871 or MAS 403 BT.

Steep Taper (MAS 403-BT) Gauge Retention Knobs

Use a BT Standard gauge/taper in steep taper spindles.

Steep Taper (CAT/ANSI) Gauge Retention Knobs

Use a CAT/ANSI (ASME) B5.50 Standard "V" taper gauge in steep taper spindles.

Steep Taper (DIN) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.