HSK Flanges, Special
HSK adapter flanges are intended for special clamping purposes of HSK tool holders. They can be retrofitted to lathes for HSK blank tool holder building. Ask us about the advantages of various clamping cartridges (grippers), and components needed for manual HSK clamping.
VDI to HSK-C Basic Adapter Flanges
- For fixed, centered tools - Includes clamping set - Includes brass locking ring
| HSK-C Taper (d1) | DIN 69880-1 (VDI) | Length (l1) | d2 | l2 | SW | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| HSK-C 63 | 40 | 80 | 83 | 50 | 5 | 683.510.040.063 | ||
| HSK-C 63 | 50 | 80 | 98 | 50 | 5 | 683.510.050.063 | ||
| HSK-C 80 | 50 | 100 | 98 | 70 | 6 | 683.510.050.080 | ||
| HSK-C 80 | 60 | 100 | 123 | 62 | 6 | 683.510.060.080 | ||
| HSK-C 100 | 60 | 125 | 123 | 87 | 8 | 683.510.060.100 |
HSK PowerClamp Adapter Flanges for Turning Machines
- For fixed tools - Includes setting element to eliminate drive play with vertical tools - Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screws
| Taper (d1) | Length (l1) | Ø (d2) | d3 | l2 | l3 | SW | Version | Part Number |
|---|---|---|---|---|---|---|---|---|
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Right | 683.4582.048.200 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Left | 683.582.038.100 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Right | 683.582.038.200 |
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Left | 683.582.048.100 |
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
- Includes clamping set for conventional cooling - Includes retention screws
| Taper | Length (l1) | Ø (d2) | Taper (SK) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-C 40 | 25 | 50 | SK DIN 30 | 683.4387.030.030 | ||||
| HSK-C 50 | 20 | 63 | SK DIN 40 | 683.4387.040.038 | ||||
| HSK-C 63 | 25 | 80 | SK DIN 50 | 683.4387.050.048 | ||||
| HSK-C 80 | 40 | 100 | SK DIN 50 | 683.4387.050.060 |
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
| Nominal Size (HSK-C) | Module Diameter D1 | D2 | A | L1 | kg | lb | Part Number | |
|---|---|---|---|---|---|---|---|---|
| HSK-C 32 | 60 | 37 | 26 | 13 | 0.40 | 0.88 | 687.5520-05-K | |
| HSK-C 40 | 70 | 45 | 30 | 15 | 0.60 | 1.32 | 687.5520-06-K | |
| HSK-C 63 | 100 | 70 | 43 | 22 | 1.8 | 687.5520-08-K | ||
| HSK-C 80 | 117 | 87 | 50 | 29 | 2.7 | 687.5520-09-K |
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
Submit your feedback