350.410

DIN Spindles

An economical manual HSK spindle per DIN 69002, with integrated coupling. Belt-type units are also available.

PDF Data Sheet: DIN Spindles (350.410)

An economical manual HSK spindle per DIN 69002, with integrated coupling. Belt-type units are also available.

See PDF data sheet for more details and performance data.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (DIN Spindles) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Steep Taper (DIN 69871) Gauge Retention Knobs
Steep Taper (DIN 69871) Gauge Retention Knobs

Use a DIN 69871 Standard gauge/taper in steep taper spindles.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

Hollow Taper Shank Type C
Hollow Taper Shank Type C

Preferably for use with spindles in transfer lines and special-purpose machines without automatic tool changing, stub spindles, extensions or reducers. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.

Steep Taper (DIN) to HSK Adapters
Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

Steep Taper (CAT/ANSI) to HSK Adapters
Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

Hollow Taper Shank Type E
Hollow Taper Shank Type E

For use with high-frequency spindles and wood working machines. Hollow Taper Shanks for High-Speed Cutting (HSC) acc. to the Pre-Standard DIN 69 893 Part 5 and 6 with Gripper Groove.

Steep Taper Adapter Knob Kits
Steep Taper Adapter Knob Kits

Retention plug kits include all standard knob configurations for using CAT40 or DIN40 gauge taper with CAT/DIN/BT spindles.

Dial Indicator Spindle Taper Gauges
Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Steep Taper (DIN) Drawbar Force Gauges
Steep Taper (DIN) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.

ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079

- Includes clamping set for conventional cooling - Includes retention screws

Page loaded in 0.1178 seconds.