683.333

Guhring HSK-C Side Lock Holders

Guhring HSK-C Side Lock Holders (Click image to enlarge)
Guhring HSK-C Side Lock Holders (Click image to enlarge)

Available for 32, 40, 50, 63

PDF Data Sheet: Guhring HSK-C Side Lock Holders (683.333)

Taper (d3) Length (l1) Ø (d1) Part Number
HSK-C 32   60  6            683.4333.006.032
HSK-C 40   60  6            683.4333.006.040
HSK-C 50   60  6            683.4333.006.050
HSK-C 63   60  6            683.4333.006.063
HSK-C 32   60  8            683.4333.008.032
HSK-C 40   60  8            683.4333.008.040
HSK-C 50   60  8            683.4333.008.050
HSK-C 63   60  8            683.4333.008.063
HSK-C 32   65  10            683.4333.010.032
HSK-C 40   65  10            683.4333.010.040
HSK-C 50   65  10            683.4333.010.050
HSK-C 63   65  10            683.4333.010.063
HSK-C 40   70  12            683.4333.012.040
HSK-C 50   75  12            683.4333.012.050
HSK-C 63   75  12            683.4333.012.063
HSK-C 40   70  14            683.4333.014.040
HSK-C 50   75  14            683.4333.014.050
HSK-C 63   75  14            683.4333.014.063
HSK-C 40   75  16            683.4333.016.040
HSK-C 50   80  16            683.4333.016.050
HSK-C 63   80  16            683.4333.016.063
HSK-C 50   80  18            683.4333.018.050
HSK-C 63   80  18            683.4333.018.063
HSK-C 40   80  20            683.4333.020.040
HSK-C 50   80  20            683.4333.020.050
HSK-C 63   80  20            683.4333.020.063
HSK-C 50   95  25            683.4333.025.050
HSK-C 63   95  25            683.4333.025.063
HSK-C 63   100  32            683.4333.032.063

Product Information
• Balancing quality: G6.3 / 15,000 rpm.
• With bore to DIN 1835-2 form E "Whistle Notch".
• From bore d1= 25 with two clamping screws.

Scope of Delivery
• Includes clamping screw and setting screw.
• Angle a:
25 degrees at diameter 6-20
45 degrees at diameter 25-32


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Guhring HSK-C Side Lock Holders) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-A Side Lock Holders (Weldon Side)
HSK-A Side Lock Holders (Weldon Side)

Available for 32, 40, 50, 63, 80, 100

HSK-A Side Lock Holders (Whistle Notch)
HSK-A Side Lock Holders (Whistle Notch)

Available for HSK-A 32, 40, 50, 63, 80, 100

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

HSK-C Collet Holders
HSK-C Collet Holders

Available for HSK-C 25, 32, 40, 50, 63

HSK-A Morse Taper Holders
HSK-A Morse Taper Holders

Available for HSK-A 50, 63, 80, 100

Steep Taper (CAT/ANSI) to HSK Adapters
Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

HSK-A Collet Holders
HSK-A Collet Holders

Available for HSK-A 32, 40, 50, 63, 80, 100

HSK-C Collet Holders (Sealed Version)
HSK-C Collet Holders (Sealed Version)

Available for HSK-C 25, 32, 40, 50, 63

Steep Taper (DIN) to HSK Adapters
Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

Page loaded in 0.1085 seconds.