240.310

Hydrostatic Slides

- Very low friction, no friction at positioning - Movement of 0.1 micro-m possible - No reversal backlash of friction force

PDF Data Sheet: Hydrostatic Slides (240.310)

Features of Hydrostatic Slides • Very low friction, no friction at positioning
• Movement of 0.1 micro-m possible
• No reversal backlash of friction force
• No slip-stick effect at slow motion
• Zero wear because there is no contact when operating
• No precision or stiffness loss, even under full-load machining and
oscillating motion
• No friction variation caused by ball reversing
• Better damping, resulting in better workpiece finish, longer tool life,
and larger cutting volume
• No vibration, which is caused when reversing rolling systems
• Not sensitive to chips and other debris
• Extremely straight movement possible

Technical Features of Hydrostatic Slides • High precision and extremely parallel horizontal pocket gaps
– gaps at the keepers stay parallel even when bending forces
are applied
• No deformation caused by screws in the slide or guideway
• Low production costs because no rails are necessary and no
parallel grinding with small tolerances is required
• Ideal for horizontal applications, where machining and acceleration
forces are lower than the weight forces on the pockets
• Ideal for horizontal and vertical slides with high forces and torque
load
• Very effective for cylindrical grinders, fl at grinders, measuring
machines, and ultra-precision machines
• The side stiffness increases with increased force on the V-pockets
• Hydrostatic guideways can compensate for forces resulting from
weight, machining and acceleration. In addition, high speed
operation as well as tight stiffness and damping requirements
are obtainable


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Hydrostatic Slides) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Hydrostatic Linear Motor Guide
Hydrostatic Linear Motor Guide

The PM Flow Controller makes it possible for machine builders to easily integrate custom hydrostatic systems into both new and existing machines.

CBN Hydrostatic Grinding Spindle Systems
CBN Hydrostatic Grinding Spindle Systems

This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows the use of CBN wheels even for undercuts in a camshaft application.

Hydrostatic Application Worksheet
Hydrostatic Application Worksheet

Download the PDF data sheet for the Hydrostatic Application Worksheet

Application: Hydrostatic Rotary Tables
Application: Hydrostatic Rotary Tables

The world's largest gear and profile grinding machines use hydrostatic bearings.

Hydrostatic Leadscrews
Hydrostatic Leadscrews

- Speed comparable to a linear motor - Very low friction when machining, virtually frictionless during positioning - Steps in the 0.1 micron range are possible - No backlash when reversing direction

Application: Hydrostatic Linear Motor Guide
Application: Hydrostatic Linear Motor Guide

Linear motors are used on high-speed machine tools with high acceleration and slide speeds. For slides with linear motors, HYPROSTATIK has developed hydrostatic guideways that have no wear, excellent damping characteristics, high stiffness and much lower friction when compared with ball or roller rails.

Hydrostatic Center Bearings
Hydrostatic Center Bearings

- Only one radial bearing - Moment and axial forces are carried by an axial bearing - Integrated clamping piston and rotating oil union for a hydraulic collet. The clamping piston is driven with hydrostatic oil and released with springs. - Extremely minimal friction (results in minimal warming during continuous operation, and more of the motor drive force applied to the workpiece).

Hydrostatic Lathe Spindles
Hydrostatic Lathe Spindles

- Very low friction will heat the spindle only slightly. Nearly all motor power gets to the workpiece. Heat that is generated is moved immediately out of the spindle area with the oil and cooled in the chiller. - No vibration from roller bearings for extremely smooth operation. - Excellent damping of vibration during grinding process, resulting in superior surface finish and workpiece accuracy. In addition, grinding wheels will stay sharp longer.

Manually-Movable Clamping Systems
Manually-Movable Clamping Systems

The manually actuated die clamping system PSP.AM is designed for clamping dies of various widths on on press slides and tables. The selflocking eccentric cam gear guarantees a simple handling with a maximum of reliability.

Page loaded in 0.1276 seconds.