240.590

Hydrostatic Lathe Spindles

- Very low friction will heat the spindle only slightly. Nearly all motor power gets to the workpiece. Heat that is generated is moved immediately out of the spindle area with the oil and cooled in the chiller. - No vibration from roller bearings for extremely smooth operation. - Excellent damping of vibration during grinding process, resulting in superior surface finish and workpiece accuracy. In addition, grinding wheels will stay sharp longer.

PDF Data Sheet: Hydrostatic Lathe Spindles (240.590)

Features of Hydrostatic Lathe Spindles • Very low friction will heat the spindle only slightly. Nearly all motor power gets to the
workpiece. Heat that is generated is moved immediately out of the spindle area with the oil and cooled in the chiller.
• No vibration from roller bearings for extremely smooth operation.
• Excellent damping of vibration during grinding process, resulting in superior surface finish and workpiece accuracy. In addition, grinding wheels will stay sharp longer.
• Very high axial and radial stiffness, allowing required dimensions to be reached faster
and more precisely. Excellent roundness of grinding diameters.
• High load capacity.
• Speed and stiffness are independent and full load turning from 0 to maximum speed is
possible.
• Wear-free because there is no contact between moving parts when in operation.
• No loss of accuracy, even under full load at maximum speed.
• Less sensitive to chips and other debris because the bearings are cleaned continuously with hydrostatic oil.
• Gap is sealed with a compressor air lock which keeps the oil in the spindle and keeps
machining coolant and chips out.
• The spindle is supplied with a properly sized hydraulic power unit with chiller. The system is designed to protect the internal bearings should electrical power fail.
• The spindle can be driven by belt, direct drive, or as a motor spindle.
• Static and dynamic bearing forces from the cutting force or unbalance of the workpiece can be detected by measuring the pocket pressure.
• The hydrostatic lathe spindle is especially well suited to horizontal or vertical turning
machines or for mill / turning machines.
• The hydrostatic spindle can be adapted to specific machining force and torque requirements


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Hydrostatic Lathe Spindles) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

CBN Hydrostatic Grinding Spindle Systems
CBN Hydrostatic Grinding Spindle Systems

This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows the use of CBN wheels even for undercuts in a camshaft application.

A2 Flanged Lathe Spindle Runout Test Bars
A2 Flanged Lathe Spindle Runout Test Bars

Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.

Lathe Spindle Face Ring
Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

VDI Lathe Turret Alignment Bars
VDI Lathe Turret Alignment Bars

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard. 465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information. Contact us for other sizes or special requirements/configurations.

Lathe Spindle Face Ring With Indicator Mounts
Lathe Spindle Face Ring With Indicator Mounts

Series 492.126 ring gauges are for lathe spindle face.

Application: Hydrostatic Rotary Tables
Application: Hydrostatic Rotary Tables

The world's largest gear and profile grinding machines use hydrostatic bearings.

Lathe Turret Alignment Bars
Lathe Turret Alignment Bars

Lathe turret test bars provide an easy way to verify turret perpendicularity. Bars are installed in the turret like a standard tool. Test bars have an accuracy of 0.003mm (0.0001 inch) and include a carrying case and certificate.

Hydrostatic Application Worksheet
Hydrostatic Application Worksheet

Download the PDF data sheet for the Hydrostatic Application Worksheet

Page loaded in 0.1287 seconds.