455.100

HSK Master Setting Gauges

HSK Master Setting Gauges (Click image to enlarge)
HSK Master Setting Gauges (Click image to enlarge)

PDF Data Sheet: HSK Master Setting Gauges (455.100)

Print Data Sheet

To guarantee accurate and repeatable machine accuracy, various other components in the total machining process need to be correctly and accurately positioned. The Center Height Gauge allows the spindle center and spindle orientation to be checked. In addition, the gauge can also be used for tool presetter verification.

Specifications subject to change; contact us when ordering.


Taper Gauge Length Diameter fg Part Number
HSK-A/C/E/T 63   lg=80  Dg=65  45          455.110.163.000
HSK-A/C/E/T 100   lg=85  Dg=102  60          455.110.190.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK Master Setting Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Tool Holder Taper Check Gauges
Tool Holder Taper Check Gauges

Available for 30, 35, 40, 45, 50 taper tool holders

HSK Dial Indicator Spindle Taper Gauge Manual
HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Zero Master Analog Sensors
Zero Master Analog Sensors

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

Dial Indicator Spindle Taper Gauges
Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

Tool Holder Drive Key Tool Taper Gauges
Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Page loaded in 0.0622 seconds.