Drawbar Stroke Position

HSK Drawbar Sensor Position Gauges
HSK Drawbar Sensor Position Gauges

Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.

Details PDF (470.210)

Taper Part Number
HSK-A/E 40                 470.210.140.000
HSK-A/E 50                 470.210.150.000
HSK-A/E 63                 470.210.163.000

HSK Drawbar Stroke Gauge Sets
HSK Drawbar Stroke Gauge Sets

The dimension L5 per DIN69893 and ISO12164 defines the position of the clamping shoulder, toleranced to JS10. Our set of clamping shoulder gauge masters allows the position of automatic clamping systems with position sensors to be verified. Set includes certified "zero" master, and two out-of-tolerance tapers (plus and minus). Out-of-tolerance tapers are approx. 3x the allowable limit.

Details PDF (470.315)

Taper Part Number
HSK-A/E25                 470.315.125.000
HSK-A/C/E/T32 and HSK-F40                 470.315.132.000
HSK-A/C/E/T40 and HSK-F50                 470.315.140.000
HSK-A/C/E/T50 and HSK-F63                 470.315.150.000
HSK-A/C/E/T63 and HSK-F80                 470.315.163.000
HSK-A/C/E/T80                 470.315.180.000
HSK-A/C/T100                 470.315.190.000
HSK-A/C/T125                 470.315.192.000

Page 637 loaded in 0.0974 seconds.