681.01218011408
HSK-E 63 Weldon Holders
For end mills with shank DIN 1835-B - DIN 1835 HB
Full Data Sheet (681.012.1801)
PDF Data Sheet: HSK-E Weldon Holders (681.012.1801)| Product | Tool Holder |
| Part Type | End Mill |
| Taper / Standard | HSK-E |
| Taper Size | 63 |
| D1 | 8 |
| Length (L) | 65 |
| Taper (D) | Length (L) | D1 | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-E 25 | 50 | 6 | 681.01218011006 | |||||
| HSK-E 25 | 50 | 8 | 681.01218011008 | |||||
| HSK-E 32 | 60 | 6 | 681.01218011106 | |||||
| HSK-E 32 | 60 | 8 | 681.01218011108 | |||||
| HSK-E 32 | 65 | 10 | 681.01218011110 | |||||
| HSK-E 40 | 60 | 6 | 681.01218011206 | |||||
| HSK-E 40 | 60 | 8 | 681.01218011208 | |||||
| HSK-E 40 | 60 | 10 | 681.01218011210 | |||||
| HSK-E 40 | 70 | 12 | 681.01218011212 | |||||
| HSK-E 40 | 75 | 14 | 681.01218011214 | |||||
| HSK-E 40 | 75 | 16 | 681.01218011216 | |||||
| HSK-E 50 | 65 | 6 | 681.01218011306 | |||||
| HSK-E 50 | 65 | 8 | 681.01218011308 | |||||
| HSK-E 50 | 80 | 10 | 681.01218011310 | |||||
| HSK-E 50 | 80 | 12 | 681.01218011312 | |||||
| HSK-E 50 | 80 | 14 | 681.01218011314 | |||||
| HSK-E 50 | 80 | 16 | 681.01218011316 | |||||
| HSK-E 50 | 80 | 18 | 681.01218011318 | |||||
| HSK-E 50 | 80 | 20 | 681.01218011320 | |||||
| HSK-E 63 | 65 | 6 | 681.01218011406 | |||||
| HSK-E 63 | 65 | 8 | 681.01218011408 | |||||
| HSK-E 63 | 65 | 10 | 681.01218011410 | |||||
| HSK-E 63 | 80 | 12 | 681.01218011412 | |||||
| HSK-E 63 | 80 | 14 | 681.01218011414 | |||||
| HSK-E 63 | 80 | 16 | 681.01218011416 | |||||
| HSK-E 63 | 80 | 18 | 681.01218011418 | |||||
| HSK-E 63 | 80 | 20 | 681.01218011420 | |||||
| HSK-E 63 | 110 | 25 | 681.01218011425 |
For more information regarding this item (HSK-E 63 Weldon Holders) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A Side Lock Holders (Weldon Side)
Available for 32, 40, 50, 63, 80, 100
HSK-C Weldon and Whistle-Notch Holders
The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available for HSK-C 32, 40, 50, 63.
HSK-E Weldon Holders
The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available to HSK-E 25, 32, 40, 50, 63.
HSK-A Weldon Holders
For end mills with shank DIN 1835-B
- DIN 6535 HB. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.
HSK-A/C Extension Adapters
Compatible with HSK-A and HSK-C tool holders and spindles.
HSK to Steep Taper Adapters
Application: for holding steep taper tool holders in an HSK spindle.
HSK-A to HSK-A/C Extensions and Reducing Adapters
For DIN 69 893-1 Form A and C tool holders. Prepared for MAPAL clamping system. Available for HSK-A 50, 63, 80, 100, 125.
HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface (Weldon)
Available for HSK-A 40, 50, 63, 80, 100
HSK-A ABS KOMET Tooling System Basic Holders
Available for HSK-A 50, 63, 80, 100
Submit your feedback