687.5219
KS Installation Tools
Available for HSK-C 32, 40, 50, 63, 80, 100
PDF Data Sheet: KS Installation Tools (687.5219)Used for installation and removal or dismantling KS clamping cartridges (standard and high pressure clamping cartridges). The assembly tool makes insertion and removal of the clamping grippers, even on multi-spindle heads, an easy operation.
NoteInstallation and removal of the clamping cartridge is made easier by using an extension piece.
Extension piece not included.
For more information regarding this item (KS Installation Tools) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Clamping Cartridge Installation Tools
For the installation of 4-point clamping sets, if there are difficulties locking the spindle.
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
- For a coolant pressure up to 80 bar
- Includes installation and operating instructions
Manual Drawbar Style Hydraulic Clamping Systems
The drawbar style hydraulic die clamping systems are designed for clamping tools and dies of different widths on press slides. The BKZ-PS variant is equipped with a non-return valve. The BKZ-D (D = Double-acting) variant is intended for use in confined installation spaces where short clamping and/or release times are required. The BKZ-K (K = Cup) variant compensates for nonparallel tool clamping surfaces. The die clamps can be manually moved in the T-slot of the press slide between the parking position and the respective tool. Hydraulic pressure is at a maximum 400 bar.
HSK-C PowerClamp Manual Clamping Sets
- For coolant up to 80 bar
- Includes installation and operating instructions
- Includes threaded pin
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
Spring Combinations and Sets
Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.
Submit your feedback