293-AS
BERG Overview: Clamping Systems with AS-Interface
The BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.
PDF Data Sheet: BERG Overview: Clamping Systems with AS-Interface (293-AS)
ApplicationThe BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.
Design FeaturesWith the introduction of BUS systems in forming technology / quick die changing systems, it seemed logical to operate new clamping systems with a BUS system. Following the current trend, BERG Spanntechnik have developed BUS compatible clamping systems based on AS-Interface with a logic module, which have already been proven in practice, features the following advantages:
• Connection to all well-known PLC control systems and industrial PCs via industrially available AS-I-Master
• Connection to higher ranking field-buses by means of industrially available link modules
• Simple commissioning (start-up) due to integrated logic module and auto-configuration of the AS-I BUS
• Programmers do not require any detailed knowledge of the clamping system functions
• Integrated rotary field control prevents malfunctions
• Minimum installation and commissioning times
• High availability of all clamping elements and targeted error detection by a electronic diagnosis program
• Simple replacement of a clamping system due to automatic address programming
• EMC certified
• Simple retrofitting of forming machines / press clamping systems
• Minimum cable expenditure
• Minimum space required for external hardware in the switch cabinet
• Extremely low costs for external hardware in the switch cabinet
• Standardized signal exchange allows for the use of different clamping and chucking systems
• Maintenance-free due to full electronics
For more information regarding this item (BERG Overview: Clamping Systems with AS-Interface) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Capto Clamping Systems
BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.
NAB Pull Studs
Pull studs are the interface between devices, pallets and the clamping systems of the machine tool. For applications with two, four or more clamping heads, solid bolts are used for center position, sword bolts are used to determine the angled position and retaining bolts are exclusively used for vertical positioning. Versions are available for both front and rear installation.
Parallel to the applications of the BERG clamping heads with support cone, screw-in bolts are available as solid bolts and retaining bolts with screw thread. These are used for very high drawing-in forces and maximum stability in a minimum amount of space.
BERG Pallet Holding Force Gauges
Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs
EP-S3 Programmable Clamping Systems
Used in all areas of machine tool and plant construction where fast and precise torque building and positioning are required.
Capto Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for Coromant Capto tools developed by BERG Spanntechnik is used in conjunction with Coromant Capto clamping sets. In this solution the wedge drive is rigidly connected to the clamping set via a drawbar.
HSK Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.
Steep Taper Hydraulic Self-Locking Clamping Systems
The self-limiting clamping system for quick-release taper tools developed by BERG Spanntechnik is used in conjunction with the proven SSK clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.
Stationary Clamping Systems
The hydraulic die clamping system, PSP...HB, is designed to automatically clamp tools at the press slide or on the table. In the "Unclamped" position, the tensioning rod is completely retracted into the clamping element and initially moved out of the clamping element when pressure is applied.
Submit your feedback