472.068

Flow Rate Measuring Instruments

Flow Rate Measuring Instruments (Click image to enlarge)
Flow Rate Measuring Instruments (Click image to enlarge)

Enables quick and simple measuring of pressure and rate of flow of coolant when the actual tool is clamped directly in the stationary tool spindle. This way, it is possible to establish the real conditions of the relevant machine and tool configuration and measure the resulting actual rate of flow.

PDF Data Sheet: Flow Rate Measuring Instruments (472.068)

Part Number
                472.068.010.000

Enables quick and simple measuring of pressure and rate of flow of coolant when the actual tool is clamped directly in the stationary tool spindle. This way, it is possible to establish the real conditions of the relevant machine and tool configuration and measure the resulting actual rate of flow.

Provides the following information:
• Pressure and volume flow of the coolant pump, the so-called P/Q characteristic curve
• Possible pump or seal wear as well as rotary transmission losses
• Possible narrowed cross sections in the line through machine, spindle, and tool holder
• Possible blocked filters
• Possible narrowed cross sections resulting from deposits on the surface of the coolant ducts in the tool
• The coolant duct layout in the tool

To identify and rectify possible weak points in the overall system, this way, the tool life of the applied tool can be optimized preventing tool breakage as well as chip congestion and jamming.

Provides data of sensors and indicates the measuring results of the display fixture. A data interface enables an evaluation via software on your PC (interface and software are available on request).

• Pressure checking range: 1 to 120 bar
• Rate of flow checking range: 2 to 40 l/min
• Diameter holder shank: 16 mm
• Diameter range tool holder: ER 32 / 6 to 20 mm
• Display for existing pressure P in bar also rate of flow volume Q in l/min
• Clamping fixture and checking instrument
• Display fixture with grip and connection socket
• Checking data cable with connector plug, length 3 m
• ER 32 collet holder and sealing washer set for standard shanks with collets from 6 to 20 mm diameter
• clamping key for tensioning nut


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Flow Rate Measuring Instruments) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Series 978 HSK 30 Degree Clamping Angle Gauges
Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

Dial Indicator Spindle Taper Gauges
Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

MQL-Check Coolant Volume Measuring Instruments
MQL-Check Coolant Volume Measuring Instruments

The development of the new MQL-Check allows simple and quick measuring of the coolant volume and the reaction time with minimal quantity lubrication (MQL) directly at the tool point. For the user, the result is a considerable increase in process reliability with MQL machining.

Hydrostatic Linear Motor Guide
Hydrostatic Linear Motor Guide

The PM Flow Controller makes it possible for machine builders to easily integrate custom hydrostatic systems into both new and existing machines.

BERG Pallet Holding Force Gauges
BERG Pallet Holding Force Gauges

Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs

Continuous Re-Cooling Power Units
Continuous Re-Cooling Power Units

The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.

Coolant Supply Measuring Instruments
Coolant Supply Measuring Instruments

Quickly and simply check the filtering efficiency of the coolant system. Thanks to replaceable stainless steel filters, the user can adapt the instrument specifically to the filtering of the coolant system. Establishes the present condition of the individual system and displays the actual filter efficiency.

Pneumatic Steep Taper Spindle Gauge Kits
Pneumatic Steep Taper Spindle Gauge Kits

Gauging kit for Steep Taper, CAT/ANSI, ISO, BT spindles with pneumatic measuring system. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.

Pneumatic HSK Spindle Gauge Kits
Pneumatic HSK Spindle Gauge Kits

Gauging kit for HSK spindles with pneumatic measuring system. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.

Page loaded in 0.1173 seconds.