410.211

Series 968 HSK Tool Holder Taper Gauges

HSK gauge setup

Zoom Enlarge Image

HSK gauge setup

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

HSK gauge setup (Click image to enlarge)
HSK Dimensions (Click image to enlarge)
HSK 63 Tool Holder Taper Check (Click image to enlarge)
Series 968 HSK Tool Holder Taper Gauges (Click image to enlarge)

PDF Data Sheet: Series 968 HSK Tool Holder Taper Gauges (410.211)

Print Data Sheet

Standard unit offers simultaneous measurement of HSK taper dimensions d2 and dk. Additional available options include:
- Tool change flange verification (d11/f3)
- 30 deg. clamping angle and knockout surface verification (d5/l5 and l6)
- Runout verification (A, B, C)


Taper Diameter Part Number
HSK-A/C/E 25     19            410.211.125.000
HSK-A/C/E 32     24            410.211.132.000
HSK-A/C/E 40     30            410.211.140.000
HSK-A/C/E 50     38            410.211.150.000
HSK-A/C/E 63     48            410.211.163.000
HSK-A/C/E 80     60            410.211.180.000
HSK-A/C/E 100     75            410.211.190.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Series 968 HSK Tool Holder Taper Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Dial Indicator Tool Taper Gauges
Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Tool Holder Taper Check Gauges
Tool Holder Taper Check Gauges

Available for 30, 35, 40, 45, 50 taper tool holders

Morse Tool Holder Taper Sleeve Gauges
Morse Tool Holder Taper Sleeve Gauges

TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a padded carrying case and certificate. Manufactured per DIN 229.

Lathe Spindle Face Ring and Taper Plug Gauges
Lathe Spindle Face Ring and Taper Plug Gauges

Series 492.026 ring gauges are for lathe spindle face. Series 492.028 plug gauges are for chuck back side mounting face. Taper gauges can be custom-manufactured to customer specifications. Hard chrome-plate and tungsten carbide gauges also available. Cases are not included. Contact us for high quality gauge crib and travel case options.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Tool Holder Drive Key Tool Taper Gauges
Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Steep Taper Tool Changer Alignment Gauges
Steep Taper Tool Changer Alignment Gauges

Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.

HSK Tool Changer Alignment Gauges
HSK Tool Changer Alignment Gauges

Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.

KM Tool Changer Alignment Gauges
KM Tool Changer Alignment Gauges

Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.

Page loaded in 0.0605 seconds.