681.012.1604

Laip HSK-C Weldon and Whistle-Notch Holders

For end mills with shank DIN 1835-B and DIN 1835-E

The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available for HSK-C 32, 40, 50, 63.

PDF Data Sheet: Laip HSK-C Weldon and Whistle-Notch Holders (681.012.1604)

Products Details Ask a Question Request a Quote

Taper (D)	Length (L)	D1	Part Number
HSK-C 32	60	6	681.01216041106
HSK-C 32	60	8	681.01216041108
HSK-C 32	65	10	681.01216041110
HSK-C 40	60	6	681.01216041206
HSK-C 40	60	8	681.01216041208
HSK-C 40	65	10	681.01216041210
HSK-C 40	70	12	681.01216041212
HSK-C 40	70	14	681.01216041214
HSK-C 40	75	16	681.01216041216
HSK-C 50	60	6	681.01216041306
HSK-C 50	60	8	681.01216041308
HSK-C 50	65	10	681.01216041310
HSK-C 50	75	12	681.01216041312
HSK-C 50	75	14	681.01216041314
HSK-C 50	80	16	681.01216041316
HSK-C 50	80	18	681.01216041318
HSK-C 50	80	20	681.01216041320
HSK-C 63	60	6	681.01216041406
HSK-C 63	60	8	681.01216041408
HSK-C 63	65	10	681.01216041410
HSK-C 63	75	12	681.01216041412
HSK-C 63	75	14	681.01216041414
HSK-C 63	80	16	681.01216041416
HSK-C 63	80	18	681.01216041418
HSK-C 63	80	20	681.01216041420
HSK-C 63	95	25	681.01216041425

• Maximum circular deviation between outer taper and D1 <= 0.003 mm.
• The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision.
• D1 >= 25 mm: two clamping holes.

For more information regarding this item (Laip HSK-C Weldon and Whistle-Notch Holders) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK-A Side Lock Holders (Whistle Notch)

Available for HSK-A 32, 40, 50, 63, 80, 100

HSK-C Side Lock Holders

Available for 32, 40, 50, 63

HSK-A Side Lock Holders (Weldon Side)

Available for 32, 40, 50, 63, 80, 100

HSK-A Whistle-Notch Holders

For end mills with shank DIN 1835-B and / or DIN 1835-E. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.

HSK-E Weldon Holders

HSK-A Reduction Sleeves for Straight Shanks with Inclined Clamping Surface (Whistle Notch)

Available for HSK-A 40, 50, 63, 80, 100

HSK-A Weldon Holders

For end mills with shank DIN 1835-B
- DIN 6535 HB. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.