430.100.835.000
Steep Taper Spindle Plug Gauges - Spindle Plug Gauge Steep Taper 30
Taper | Part Number | |||||||
---|---|---|---|---|---|---|---|---|
Spindle Plug Gauge Steep Taper 30 | 430.100.830.000 | |||||||
Spindle Plug Gauge Steep Taper 30 | 430.100.835.000 | |||||||
Steep Taper 40 | 430.100.840.000 | |||||||
Steep Taper 45 | 430.100.845.000 | |||||||
Steep Taper 50 | 430.100.850.000 | |||||||
Steep Taper 55 | 430.100.855.000 | |||||||
Steep Taper 60 | 430.100.860.000 | |||||||
Steep Taper 65 | 430.100.865.000 | |||||||
Steep Taper (ISO) 10 | Specify Gauge Diameter and Length | 430.100.A10.000 | ||||||
Steep Taper (ISO) 15 | Specify Gauge Diameter and Length | 430.100.A15.000 | ||||||
Steep Taper (ISO) 20 | Specify Gauge Diameter and Length | 430.100.A20.000 | ||||||
Steep Taper (ISO) 25 | Specify Gauge Diameter and Length | 430.100.A25.000 |
For more information regarding this item (Steep Taper Spindle Plug Gauges - Spindle Plug Gauge Steep Taper 30) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper Spindle Plug Gauges
TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65
Tool Holder Taper Sleeve Gauges
Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65
Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.
Steep Taper Spindle Taper Dial Indicator Gauge
The spindle Taper Dial Indicator Gauge gauge can be used to measure the distance between the gauge line and the spindle face. It can also be used to detect spindle taper wear
Morse Spindle Taper Plug Gauges
TAC Rockford Morse spindle taper gauges are for inspection of Morse spindle tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.
Steep Taper Spindle Gauge Manual
Download PDF for instruction manual.
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.