Wireless Machine Force Measuring
Measure turning-center (chuck) force, or power drawbar force wirelessly. When crucial measurements on force, torque, and clamping tension inside machine turning-centers and power drawbars, ForceCheck wireless gauges are a viable solution. ForceCheck gauges from TAC Rockford continue to make force checking easier for both the machine user and builder / maintenance professional with a custom wireless measuring application.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| ForceCheck Wireless Base Set | 461.320.000.000 |
Wireless Chuck Force Gauges
The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.
| Item | Jaws | Diameter | Force Range (per Jaw) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| D28 | 2 / 3 | 28 mm / 1.10 in. | 0...15kN / 3,400 lb-F | 495.205.028.003 | ||||
| D72 | 2 / 3 | 72 mm / 2.83 in. | 0...50kN / 11,200 lb-F | 495.205.072.003 | ||||
| D125 | 2 / 3 / 4 | 125 mm / 4.92 in. | 0...65kN / 14,600 lb-F | 495.205.125.004 | ||||
| D200 | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | 0...100kN / 22,500 lb-F | 495.205.200.006 | ||||
| D28 (Low Force) | 2 / 3 | 28 mm / 1.10 in. | Contact us | 495.205.028.003.LF | ||||
| D72 (Low Force) | 2 / 3 | 72 mm / 2.83 in. | Contact us | 495.205.072.003.LF | ||||
| D125 (Low Force) | 2 / 3 / 4 | 125 mm / 4.92 in. | Contact us | 495.205.125.004.LF | ||||
| D200 (Low Force) | 2 / 3 / 4 / 6 | 200 mm / 7.87 in. | Contact us | 495.205.200.006.LF |
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
Submit your feedback