293-PSP

BERG Stationary Clamping Systems

The hydraulic die clamping system, PSP...HB, is designed to automatically clamp tools at the press slide or on the table. In the "Unclamped" position, the tensioning rod is completely retracted into the clamping element and initially moved out of the clamping element when pressure is applied.

PDF Data Sheet: BERG Stationary Clamping Systems (293-PSP)

PSP ... W (AS-I)Electromechanical Clamping System Swing Out Style

Electromechanical PSP...W Clamp for die clamping on slides and blankholders. When unclamping the draw bar swings out up to 15 degrees max. The BUS controlled version PSP...W/AS-I with AS interface is available as an alternative.

PSP ... K (AS-I)Electromechanical Clamping System Rotational Style

Electromechanical PSP...K Clamp for die clamping on slides and blankholders. When unclamping the draw bar rotates by 90 degrees. The BUS controlled version PSP...K/AS-I with AS interface is available as an alternative.

PSP ... B (AS-I)Electromechanical Clamping System Pull-Back Rotational Style

Electromechanical PSP...B Clamp for die clamping on slides and for clamping of moving bolsters. When unclamping the draw bar rotates by 90° and withdraws by 120 mm max. The BUS controlled version PSP...B/AS-I with AS interface is available as an alternative.

PSP ... S (AS-I)Electromechanical Clamping System Gripper Style

Electromechanical PSP...S Clamp for die clamping on slides. When unclamping the collet opens in order to disengage the draw bolt of the die. The BUS controlled version PSP...S/AS-I with AS interface is available as an alternative.

PSP ... AT (AS-I)Electromechanical Moving Bolster Clamp Wedgebar Style

Electromechanical PSP...AT Clamp for clamping moving bolsters. When unclamping the clamping wedge withdraws into the clamp body. The BUS controlled version PSP...AT/AS-I with AS interface is available as an alternative.

PSP ... HTHydromechanical Clamping System Wedgebar Style

The hydromechanical clamping system PSP...HT is designed for clamping moving bolsters. The clamping slide generating the clamping force moves back into the housing after release.

PSP ... HWHydromechanical Clamping System Swing Out Style

Hydraulic, self-locking PSP...HW Clamp for die clamping on slides and blankholders. When unclamping the draw bar swings out up to 15 degrees max.

PSP ... HBHydromechanical Clamping System Pull-Back Rotational Style

The hydraulic die clamping system, PSP...HB, is designed to automatically clamp tools at the press slide or on the table. In the "Unclamped" position, the tensioning rod is completely retracted into the clamping element and initially moved out of the clamping element when pressure is applied. In the max. extended position, the hammer head automatically rotates into its clamping position (55 degrees) and executes the clamping stroke while being retracted. When the hammer head makes contact with the clamping surface, clamping pressure and thus clamping force is built up. For unclamping, the sequence is executed in the reverse order until the hammer head is completely retracted into the clamping element again and the tool can be changed.



Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Stationary Clamping Systems) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Stationary Hydraulic Self-locking Swing-out Style Clamping Systems
Stationary Hydraulic Self-locking Swing-out Style Clamping Systems

Hydraulic, self-locking stationary swing-out style clamp for die clamping on slides and blackholders. When unclamping the draw bar swings out up to 15 degrees max.

HDT Tool Clamping Cylinders
HDT Tool Clamping Cylinders

HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.

Stationary Electromechanical Rotational Style Clamping Systems
Stationary Electromechanical Rotational Style Clamping Systems

Electromechanical rotational-style clamp for die clamping on slides and blank-holders. When unclamping, the draw bar rotates 90 degrees.

Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems
Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems

Electromechanical wedgebar style clamp for clamping moving bolsters. When unclamping, the clamping wedge withdraws into the clamp body.

Stationary Hydraulic Wedgebar Style Clamping Systems
Stationary Hydraulic Wedgebar Style Clamping Systems

The hydromechanical wedge bar style clamping system is designed for clamping moving bolsters. The clamping slide generating the clamping force moves back into the housing after release.

Stationary Electromechanical Swing-out Style Clamping Systems
Stationary Electromechanical Swing-out Style Clamping Systems

Electromechanical swing-out style clamp for die clamping on slides and blank-holders. When unclamping the draw-bar swings out up to 15 degrees maximum.

Stationary Electromechanical Gripper Style Clamping Systems
Stationary Electromechanical Gripper Style Clamping Systems

Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.

Stationary Hydraulic Pull-back Rotational Style Clamping Systems
Stationary Hydraulic Pull-back Rotational Style Clamping Systems

The hydraulic die clamping system with pull-back rotational style clamping is designed to clamp tools automatically at the press slide or on the table.

Stationary Electromechanical Pull-back Rotational Style Clamping Systems
Stationary Electromechanical Pull-back Rotational Style Clamping Systems

Electromechanical pull-back rotational clamp for die clamping on slides and for clamping of moving bolsters. When unclamping the draw bar rotates 90 degrees and withdraws by 120 mm max.

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

Page loaded in 0.1367 seconds.