490.610.A2-20
A2-20 A2 Flanged Lathe Spindle Runout Test Bars
Lathe Face | Length (mm) | Diameter (mm) | d1 (mm) | d2 (mm) | d3 (mm) | Part Number | ||
---|---|---|---|---|---|---|---|---|
A2-11 | 300 | 50 | 280 | 235 | 22 | 490.610.A2-11 | ||
A2-15 | 300 | 50 | 380 | 330.2 | 25.5 | 490.610.A2-15 | ||
A2-20 | 300 | 50 | 520 | 463.6 | 27 | 490.610.A2-20 | ||
A2-4 | Contact us | Contact us | 490.610.A2-4 | |||||
A2-5 | 300 | 50 | 133 | 104.8 | 12 | 490.610.A2-5 | ||
A2-6 | 300 | 50 | 165 | 133.4 | 14 | 490.610.A2-6 | ||
A2-8 | 300 | 50 | 210 | 171.4 | 18 | 490.610.A2-8 |
For more information regarding this item (A2-20 A2 Flanged Lathe Spindle Runout Test Bars) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
A2 Flanged Lathe Spindle Runout Test Bars
Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.
Lathe Turret Alignment Bars
Lathe turret test bars provide an easy way to verify turret perpendicularity. Bars are installed in the turret like a standard tool. Test bars have an accuracy of 0.003mm (0.0001 inch) and include a carrying case and certificate.
Steep Taper Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
PSK Spindle Runout Test Arbors
Available for Polygonal-Shank Taper (Coromant Capto) sizes C3, C4, C5, C6, C8, and C10
HSK Spindle Runout Test Arbors
- Maximum runout error 0.003mm / 3 micron / 0.0001 inch. - Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006). - A certificate of accuracy is included. Traceable certificates available; contact us for details. - Contact us for other lengths, tapers, and other special requirements.
Steep Taper Dual Contact Runout Test Arbors
Compatible with Big-Plus® steep taper spindles.
HSK Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
Steep Taper Spindle Runout Test Arbors
Maximum runout error 0.003mm / 3 micron / 0.0001 inch.
R8 Taper Spindle Runout Test Arbor
Standard R8 spindle runout test arbor with inch retention thread. Runout <=0.003 micron (0.0001 inch)