490.610

A2 Flanged Lathe Spindle Runout Test Bars

A2-8 Lathe Runout Test Bar (Click image to enlarge)
A2-8 Lathe Runout Test Bar (Click image to enlarge)
A2 Lathe Runout Test Bars (Click image to enlarge)

A2-8 Lathe Runout Test Bar

Zoom Enlarge Image

A2-8 Lathe Runout Test Bar

Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.

PDF Data Sheet: A2 Flanged Lathe Spindle Runout Test Bars (490.610)

Lathe Face Length (mm) Diameter (mm) d1 (mm) d2 (mm) d3 (mm) Part Number
A2-4   Contact us    Contact us          490.610.A2-4
A2-5   300    50  133  104.8  12    490.610.A2-5
A2-6   300    50  165  133.4  14    490.610.A2-6
A2-8   300    50  210  171.4  18    490.610.A2-8
A2-11   300    50  280  235  22    490.610.A2-11
A2-15   300    50  380  330.2  25.5    490.610.A2-15
A2-20   300    50  520  463.6  27    490.610.A2-20

Test arbor for mounting to turning-center and measuring run-out. Designed for either A2-5 and A2-6 lathe face mounting.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (A2 Flanged Lathe Spindle Runout Test Bars) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Lathe Turret Alignment Bars
Lathe Turret Alignment Bars

Lathe turret test bars provide an easy way to verify turret perpendicularity. Bars are installed in the turret like a standard tool. Test bars have an accuracy of 0.003mm (0.0001 inch) and include a carrying case and certificate.

Steep Taper Standard Ball-End Runout Test Arbors
Steep Taper Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

PSK Spindle Runout Test Arbors
PSK Spindle Runout Test Arbors

Available for Polygonal-Shank Taper (Coromant Capto) sizes C3, C4, C5, C6, C8, and C10

HSK Spindle Runout Test Arbors
HSK Spindle Runout Test Arbors

- Maximum runout error 0.003mm / 3 micron / 0.0001 inch. - Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006). - A certificate of accuracy is included. Traceable certificates available; contact us for details. - Contact us for other lengths, tapers, and other special requirements.

Steep Taper Dual Contact Runout Test Arbors
Steep Taper Dual Contact Runout Test Arbors

Compatible with Big-Plus® steep taper spindles.

HSK Standard Ball-End Runout Test Arbors
HSK Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Steep Taper Spindle Runout Test Arbors
Steep Taper Spindle Runout Test Arbors

Maximum runout error 0.003mm / 3 micron / 0.0001 inch.

R8 Taper Spindle Runout Test Arbor
R8 Taper Spindle Runout Test Arbor

Standard R8 spindle runout test arbor with inch retention thread. Runout <=0.003 micron (0.0001 inch)

Page loaded in 0.1041 seconds.