Safety Sign Images

LBL-001 Warning Sign for

Bench Grinders

LBL-002 General Danger Sign for

Cutting and Turning Machines

LBL-003 Danger Sign for

Drilling Machines

LBL-004 Danger Sign for

Milling Machines

LBL-005 Danger Sign for

Lathes

LBL-006 Danger Sign for

Bench Grinders

LBL-007 Danger Sign for

Surface Grinders

LBL-008 Danger Sign for

Sawing Machines

Safety Signs Ordering Information

LBL-001: Warning Sign for Bench Grinders

LBL-002: General Danger Sign for Cutting and Turning Machines

LBL-003: Danger Sign for Drilling Machines

LBL-004: Danger Sign for Milling Machines

LBL-005: Danger Sign for Lathes

LBL-006: Danger Sign for Bench Grinders

LBL-007: Danger Sign for Surface Grinders

LBL-008: Danger Sign for Sawing Machines

General Sign Information

Safety signs are an important part of risk reduction for machinery–they are intended to identify and warn against specific hazards. They should be affixed to a prominent location on the machine so that they are easily seen and understood by operators and people in the machine area. Danray Products' unique, copyrighted safety signs have been designed to comply with the ANSI Z535 series of standards for the design, application, and use of signs, colors, and symbols for accident prevention. These 0.002"-thick polyester signs have a high-bond-strength acrylic adhesive by 3M that has excellent chemical resistance and holding strength even at high temperatures (up to 350°F). This adhesive is the best choice for signs that need to adhere to LSE (low surface energy) plastics, powder coatings, or oily metals.

Our safety signs are proudly designed and printed in the United States of America!

LBL-001 Bench Grinder Warning Sign

OSHA 29 CFR 1910.215 for grinders is one of the most frequently cited standards for violations during OSHA inspections. This is due to improperly adjusted work rests and tongues on bench (and pedestal) grinders. According to 29 CFR 1910.215(a)(4), work rests must be kept adjusted closely to the wheel with a maximum opening of 1/8" to prevent the workpiece from being jammed between the wheel and the rest, which may cause wheel breakage. In addition, paragraph (b)(9) of this section states that the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top must never exceed 1/4".

Since most people are unaware of these OSHA-required adjustments on bench grinders, our exclusive, U.S. Copyright Office-registered warning sign can be affixed directly to bench grinders to remind employers and operators of the proper adjustments for compliance with the OSHA 29 CFR 1910.215, ANSI B11.9, and ANSI B7.1 grinder safety standards. This sign can help reduce OSHA violations because it clearly depicts a side view of a bench grinder with arrows and large fractions showing the proper adjustments of the work rest and tongue, as well as stating these requirements in the text below. The sign is 2½" L x 3½" H.

LBL-002 General Danger Sign for Cutting and Turning Machines

This unique danger sign addresses the main safety hazards created by rotating parts and cutting tools. It is a general sign that can be applied to many metalworking and woodworking machines such as drill presses, milling machines, grinders, lathes, and saws. This sign is 5" L x 6" H.

LBL-003 Danger Sign for Drilling Machines

This unique sign identifies and warns of hazards associated with drilling machines. This sign is 5" L x 6" H.

LBL-004 Danger Sign for Milling Machines

This unique sign identifies and warns of hazards associated with milling machines. This sign is 5" L x 6" H.

LBL-005 Danger Sign for Lathes

This unique sign identifies and warns of hazards associated with manual turning machines (lathes). This sign is 5" L x 6" H.

LBL-006 Danger Sign for Bench Grinders

This unique sign identifies and warns of hazards associated with bench and pedestal (offhand) grinders. This sign is 5" L x 6" H.

LBL-007 Danger Sign for Surface Grinders

This unique sign identifies and warns of hazards associated with surface grinders. This sign is 5" L x 6" H.

LBL-008 Danger Sign for Sawing Machines

This unique sign identifies and warns of hazards associated with sawing machines. This sign is 5" L x 6" H.