465.F00

Steep Taper Dual Contact Runout Test Arbors

Steep Taper Dual Contact Runout Test Arbors (Click image to enlarge)
Dimensional Drawing  for Dual Contact (Big Plus) Runout Arbor (Click image to enlarge)

Compatible with Big-PlusĀ® steep taper spindles.

PDF Data Sheet: Steep Taper Dual Contact Runout Test Arbors (465.F00)

Spindle Taper Length (L) Diameter (D) Part Number
Steep Taper (BT) 30 Dual Contact   235 mm  32 mm            465.F30.000.000
Steep Taper (BT) 40 Dual Contact   300 mm  40 mm            465.F40.000.000
Steep Taper (BT) 50 Dual Contact   300 mm  50 mm            465.F50.000.000
Steep Taper (CAT/ANSI) 40 Dual Contact   300 mm  40 mm            465.G40.000.000
Steep Taper (CAT/ANSI) 50 Dual Contact   300 mm  50 mm            465.G50.000.000
Steep Taper (DIN) 40 Dual Contact   Contact us  Contact us            465.H40.000.000
Steep Taper (DIN) 50 Dual Contact   Contact us  Contact us            465.H50.000.000
Custom Size   Contact us with your requirements              465.F00.SP

Runout Arbor Upright Storage Cases
Runout Arbor Upright Storage Cases

Our most popular case, the upright storage case protects a runout arbor from dirt and damage. The arbor rests vertically in the case, suspended from the flange. Upright storage of runout arbors is recommended
-- the upright case has foam guides that allow horizontal use if preferred. Case is available in tall and short configurations depending on arbor length. Case is made of 9 ply Baltic Birch.

Details PDF (465.002)


Heavy-Duty Runout Arbor Travel Cases
Heavy-Duty Runout Arbor Travel Cases

The runout arbor travel case is designed for portability while protecting arbors. The case holds two arbors, with additional space for extra retention knobs, indicator, and a magnetic base. The case is virtually indestructible and waterproof. Can be used with padlocks for added security.

Details PDF (465.001)

Part Number
Heavy-Duty Runout Arbor Travel Case                 465.001.000.000

Indicators and Bases
Indicators and Bases

TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges.

Available as kits with storage case or individually.

Details

Product Resolution Base Part Number
Dial Indicator Mahr 4334000       0.001mm    N/A      499.220.151
Dial Indicator Mahr 4334900       0.00005"    N/A      499.220.155
Test Indicator       0.002mm    N/A      499.220.161
Test Indicator       0.0001"    N/A      499.220.165
Standard Magnetic Indicator Base       N/A    N/A      499.250.010
High-Stiffness Magnetic Indicator Base       N/A    N/A      499.250.020
Kit w/ Standard Base, 0.001mm Indicator, Carrying Case       0.001mm    Standard      499.255.010.151
Kit w/ Standard Base, 0.00005" Indicator, Carrying Case       0.00005"    Standard      499.255.010.155
Kit w/ Standard Base, 0.002mm Indicator, Carrying Case       0.002mm    Standard      499.255.010.161
Kit w/ Standard Base, 0.0001" Indicator, Carrying Case       0.0001"    Standard      499.255.010.165
Kit w/ High-Stiffness Base, 0.001mm Indicator, Carrying Case       0.001mm    High-Stiffness      499.255.020.151
Kit w/ High-Stiffness Base, 0.00005" Indicator, Carrying Case       0.00005"    High-Stiffness      499.255.020.155
Kit w/ High-Stiffness Base, 0.002mm Indicator, Carrying Case       0.002mm    High-Stiffness      499.255.020.161
Kit w/ High-Stiffness Base, 0.0001" Indicator, Carrying Case       0.0001"    High-Stiffness      499.255.020.165

Steep Taper (MAS 403-BT) Gauge Retention Knobs
Steep Taper (MAS 403-BT) Gauge Retention Knobs

Use a BT Standard gauge/taper in steep taper spindles.

Details

Taper Length (B) Angle (G) Thread Type / Adapter Knob Part Number
Steep Taper (BT) 40   28mm  30 deg.  M16      BT Standard    590.540.730.800-28mm
Steep Taper (BT) 40   28mm  45 deg.  M16      BT Standard    590.540.740.800-28mm
Steep Taper (BT) 40   28mm  90 deg.  M16      BT Standard    590.540.700.800-28mm
Steep Taper (BT) 50   35mm  30 deg.  M24      BT Standard    590.550.730.800-35mm
Steep Taper (BT) 50   35mm  45 deg.  M24      BT Standard    590.550.740.800-35mm
Steep Taper (BT) 50   35mm  90 deg.  M24      BT Standard    590.550.700.800-35mm
Steep Taper (BT) 30   0.75mm  -  -      DIN 30 Gauge >> BT 30 Spindle  -  590.530.005.000-0.75mm
Steep Taper (BT) 40   25.15mm  30 deg.  M16      DIN 40 Gauge >> BT 40 Spindle    590.540.730.800-25.15mm
Steep Taper (BT) 40   25.15mm  45 deg.  M16      DIN 40 Gauge >> BT 40 Spindle    590.540.740.800-25.15mm
Steep Taper (BT) 40   25.15mm  90 deg.  M16      DIN 40 Gauge >> BT 40 Spindle    590.540.700.800-25.15mm
Steep Taper (BT) 50   35.2mm  30 deg.  M24      DIN 50 Gauge >> BT 50 Spindle    590.550.730.800-35.2mm
Steep Taper (BT) 50   35.2mm  45 deg.  M24      DIN 50 Gauge >> BT 50 Spindle    590.550.740.800-35.2mm
Steep Taper (BT) 50   35.2mm  90 deg.  M24      DIN 50 Gauge >> BT 50 Spindle    590.550.700.800-35.2mm
Steep Taper (BT) 40   28mm  30 deg.  5/8"-11      CAT 40 Gauge >> BT 40 Spindle    590.540.730.900-28mm
Steep Taper (BT) 40   28mm  45 deg.  5/8"-11      CAT 40 Gauge >> BT 40 Spindle    590.540.740.900-28mm
Steep Taper (BT) 40   28mm  90 deg.  5/8"-11       CAT 40 Gauge >> BT 40 Spindle     590.540.700.900-28mm
Steep Taper (BT) 40   25.15mm  30 deg.  5/8"-11      CAT 40 Gauge >> BT 40 Spindle    590.540.730.900-25.15mm
Steep Taper (BT) 40   25.15mm  45 deg.  5/8"-11      CAT 40 Gauge >> BT 40 Spindle    590.540.740.900-25.15mm
Steep Taper (BT) 40   25.15mm  90 deg.  5/8"-11      CAT 40 Gauge >> BT 40 Spindle    590.540.700.900-25.15mm
Steep Taper (BT) 50   35mm  30 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.730.900-35mm
Steep Taper (BT) 50   35mm  45 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.740.900-35mm
Steep Taper (BT) 50   35mm  90 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.700.900-35mm
Steep Taper (BT) 50   35.2mm  30 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.730.900-35.2mm
Steep Taper (BT) 50   35.2mm  45 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.740.900-35.2mm
Steep Taper (BT) 50   35.2mm  90 deg.  1"-8      CAT 50 Gauge >> BT 50 Spindle    590.550.700.900-35.2mm

Steep Taper (DIN 69871) Gauge Retention Knobs
Steep Taper (DIN 69871) Gauge Retention Knobs

Use a DIN 69871 Standard gauge/taper in steep taper spindles.

Details

Spindle Taper Length (B) Angle (G) Thread Type / Adapter Knob Part Number
Steep Taper (DIN) 30   19  15 deg.  M12      DIN 69871    590.530.810.800
Steep Taper (DIN) 40   20  15 deg.  M16      DIN 69871    590.540.810.800
Steep Taper (DIN) 50   25  15 deg.  M24      DIN 68871    590.550.810.800
Steep Taper (DIN) 60   30  15 deg.  M30      DIN 69871    590.560.811.800
Steep Taper (DIN) 30   19  15 deg.  1/2'-13      CAT 30 Gauge >> DIN 30 Spindle    590.530.810.900
Steep Taper (DIN) 40   20  15 deg.  5/8"-11      CAT 40 Gauge >> DIN 40 Spindle    590.540.810.900
Steep Taper (DIN) 50   25  15 deg.  1"-8      CAT 50 Gauge >> DIN 50 Spindle    590.550.810.900
Steep Taper (DIN) 40   23  15 deg.  M16      BT 40 Gauge >> DIN 40 Spindle    590.540.811.700-23mm

Steep Taper (CAT/ANSI) Gauge Retention Knobs
Steep Taper (CAT/ANSI) Gauge Retention Knobs

Use a CAT/ANSI (ASME) B5.50 Standard "V" taper gauge in steep taper spindles.

Details

Taper Length (B) Angle (G) Thread Type / Adapter Knob Part Number
Steep Taper (CAT/ANSI) 30   0.32"  45 deg.  1/2"-13      CAT/ANSI (ASME) B5.50    590.530.940.900
Steep Taper (CAT/ANSI) 40   0.44"  45 deg.  5/8"-11      CAT/ANSI (ASME) B5.50    590.540.940.900
Steep Taper (CAT/ANSI) 50   0.70"  45 deg.  1"-8      CAT/ANSI (ASME) B5.50    590.550.940.900
Steep Taper (CAT/ANSI) 60   1.08"  45 deg.  1.25"-7      CAT/ANSI (ASME) B5.50    590.560.941.900
Steep Taper (CAT/ANSI) 40   14.02  45 deg.  M16      BT 40 Gauge >> CAT 40 Spindle    590.540.940.700-14.02mm
Steep Taper (CAT/ANSI) 30   0.32"  45 deg.  M12      DIN 30 Gauge >> CAT 30 Spindle    590.530.940.800
Steep Taper (CAT/ANSI) 40   0.44"  45 deg.  M16      DIN 40 Gauge >> CAT 40 Spindle    590.540.940.800
Steep Taper (CAT/ANSI) 50   0.70"  45 deg.  M24      DIN 50 Gauge >> CAT 50 Spindle    590.550.940.800
Steep Taper (CAT/ANSI) 60   1.08"  45 deg.  M30      DIN 60 Gauge >> CAT 60 Spindle    590.560.941.800

Spindle runout test bars for dual-contact steep taper sizes 30, 40, 50 and CAT/ANSI 40 and 50. Test bars contact on both the taper and flange face.

• Maximum runout error 0.003mm / 3 micron / 0.0001 inch.

• Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).

• A certificate of accuracy is included. Traceable certificates available; contact us for details.

• Contact us for other lengths, tapers, and other special requirements.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Steep Taper Dual Contact Runout Test Arbors) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Steep Taper Standard Ball-End Runout Test Arbors
Steep Taper Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

PSC / PSK Spindle Runout Test Arbors
PSC / PSK Spindle Runout Test Arbors

Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.

HSK Spindle Runout Test Arbors
HSK Spindle Runout Test Arbors


- Maximum runout error 0.003mm / 3 micron / 0.00012 inch.

- Carrying cases are not included. Visit Data Sheet 465.006 for available case styles.
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.

HSK Standard Ball-End Runout Test Arbors
HSK Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Steep Taper Precision Ball-End Runout Test Arbors
Steep Taper Precision Ball-End Runout Test Arbors

Our 467 precision version feature an adjustment mechanism which allows for improved accuracy when compared to our standard 466 ball arbors.

Steep Taper Spindle Runout Test Arbors
Steep Taper Spindle Runout Test Arbors


-Maximum runout error 0.003mm / 3 micron / 0.00012 inch
-Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
-Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
-A certificate of accuracy is included. Traceable certificates available; contact us for details.
-Contact us for other lengths, tapers, and other special requirements.

Spindle Runout Test Arbors
Spindle Runout Test Arbors


-Maximum runout error 0.003mm / 3 micron / 0.00012 inch
-Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
-Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
-A certificate of accuracy is included. Traceable certificates available; contact us for details.
-Contact us for other lengths, tapers, and other special requirements.

KM Spindle Runout Test Arbors
KM Spindle Runout Test Arbors


- Maximum runout error 0.003mm [0.00012 in.]


- Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).


- A certificate of accuracy is included. Traceable certificates available; contact us for details.


- Contact us for other lengths, tapers, and other special requirements.

* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.

KM Precision Ball-End Runout Test Arbors
KM Precision Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Our 467 precision version feature an adjustment mechanism which allows for improved accuracy.

* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.

Page loaded in 0.2624 seconds.