For verification of 5-axis steep taper spindle machining centers
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
Ball runout to taper ≤0.010 mm (0.0004"), with a ≤0.002 (0.00008") runout shaft below for checking axial runout.
Arbors do not include a carrying case. Visit our carrying case options page for gauge crib upright storage, travel, and customized carrying case solutions.
A certificate of accuracy is included.
Gauge length is measured from the tool holder gauge line to the end of the ball.
Other steep taper standards and sizes as well as different gauge lengths and ball diameters are available. Contact us for more information.
|Taper||Gauge Length||Ball Diameter||Part Number|
|Steep Taper (BT) 40||150||30||466.740.000.000|
|Steep Taper (BT) 50||150||30||466.750.000.000|
|Steep Taper 40 (DIN) (Compatible with CAT/ANSI)||150||30||466.840.000.000|
|Steep Taper 50 (DIN) (Compatible with CAT/ANSI)||150||30||466.850.000.000|
|Steep Taper (CAT/ANSI) 40||150||30||466.940.000.000|
|Steep Taper (CAT/ANSI) 50||150||30||466.950.000.000|
For more information regarding this item (Steep Taper Standard Ball-End Runout Test Arbors) or other items, fill out the form below
or contact our office directly:
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Ball-end arbors are typically used on 5-axis machining centers, but can also be used in place of a standard runout arbor if ultra-precision is required.