470.110

Drawbar Stroke Verification Gauges

Drawbar Stroke Verification Gauges (Click image to enlarge)
Drawbar Stroke Verification Gauges (Click image to enlarge)

Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.

PDF Data Sheet: Drawbar Stroke Verification Gauges (470.110)

Taper Part Number
40                 470.110.840.000
50                 470.110.850.000

Correct drawbar stroke in the spindle is critical to reliable machine operation. An incorrectly set stroke means the tool holder is likely not held correctly, leading to spindle taper, tool holder, gripper, and retention knob damage. An incorrectly set knock-out stroke can also result in "stuck" tool holders.

Using the stroke verification gauge, this critical setting can be quickly checked as part of a preventative maintenance program. For spindle service technicians, the gauge is an indispensable service tool and time-saver.

Features • Easy to operate and accurate electronic digital readout
• Precision ground taper and measurement pin for long life

Benefits • Prevent gripper failures
• Prevent spindle and tool holder taper damage
• Prevent "stuck" tool holders


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Drawbar Stroke Verification Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK Drawbar Sensor Position Gauges
HSK Drawbar Sensor Position Gauges

Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.

Series 968 HSK Tool Holder Taper Gauges
Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

Drawbar Clamping Measuring Bars
Drawbar Clamping Measuring Bars

This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.

Drawbar Clamping Force Gauges, Wired
Drawbar Clamping Force Gauges, Wired

Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.

Machine-Integrated Drawbar Force Gauges
Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Workholding Collet Drawbar Force Gauge
Workholding Collet Drawbar Force Gauge

ForceCheck collet force gauges measure the drawbar pullback force of a 5C, 16C, or 20C collet workholding system. Measurement of collet drawbar force provides an easy way to ensure correct force from machine to machine, or between setups for different parts.

Kennametal (KM Taper) Drawbar Force Gauges
Kennametal (KM Taper) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.

Steep Taper (ISO) Drawbar Force Gauges
Steep Taper (ISO) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Steep Taper (SK) ISO standard spindle.

Automatic Hydraulic Drawbar Style Clamping Systems
Automatic Hydraulic Drawbar Style Clamping Systems

The hydraulic die clamping system with drawbar style clamping is designed for clamping dies of different widths on press slides. The clamping actuator moves automatically into the T-slot of the press slide between the parking position and the respective die. The clamping element can clamp different clamping rim heights due to the long clamping stroke of the double acting cylinder. Hydraulic pressure is at a maximum 400 bar.

Page loaded in 0.1182 seconds.