320.004
Gutekunst Square Springs
We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.
PDF Data Sheet: Gutekunst Square Springs (320.004)We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.
The following limits must be complied with for the single dimensions as per drawing:
Maß BF - max. 20,0 mm
Maß AF - max. 10,5 mm
Maß LF - max. max. 1000 mm
For more information regarding this item (Gutekunst Square Springs) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Tension and Torsion Springs
We are able to offer our customers tension, torsion and individual form springs made of round, square or flat wire as well as of strip steel for all kinds of applications.
Multi-Wire Springs
Multi-wire springs are made of wire strands with various strand structures and are put to use as compression, torsion, tension and form springs.
Compression Springs Overview
Steel springs from Gutekunst are manufactured using spring steel wire material no.1.4310 in compliance with EN 10270 part 3 (AISI 302 / BS 301S21). The tolerances of the wire diameters comply with DIN 2076.
Special Multi-Characteristic Springs
Röhrs special springs with two characteristics are a specialty, in which two spring characteristics are combined into one spring.
Leaf Springs
We use the following materials in any variant in manufacturing for our clients:
1.4310, 1.4301, CK 75 G, CK 75 H, CK 85, CK 101, CuSn6, CuZn37, CuBe2
Plus any other special material you may supply. We offer the following range of dimensions: strip thickness values of 0.1 to 3.0 mm, strip widths of 2.0 to 120 mm.
Flat Wire Compression Springs
Compression springs made from flat wire
- wound to the spring axis
- offer the advantage of higher energy absorption at the same installation space compared to round wire compression springs. Furthermore, flat wire compression springs are more resistant to buckling and will encounter no friction martensite at high frequencies
-- unlike round wire compression springs, where the life expectancy is reduced. Our in-house rolling mills allow us to roll and process high-quality spring steels to the specific wire profiles our customers need. By choosing the right wire profile and spring dimensions, both linear and progressive characteristics can be realized.
Machinist Precision Square Levels
Special cast-iron frame with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany.
Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information).
Levels for large shaft-diameter or with magnetic faces available on request.
Round Wire Compression Springs
Round wire compression springs are used in countless applications and fulfill / meet the widest range of technical requirements. We calculate the ideal spring design and select the appropriate spring material according to the load and environmental conditions. We can guarantee our customers the highest quality of our products.
Special Automotive Springs
Roehrs automotive exhaust system springs are designed for use between the engine and exhaust system. They utilize a fully elastic suspension to minimize bending stress, and are designed for absorption of axial forces and torsion at temperatures up to 400 °C. The springs minimize noise and help to extend the lifetime of the exhaust system since they are constructed of corrosion resistant materials.
Submit your feedback