410.230.192.000 HSK-A 125 Tool Holder Taper 30 Degree Clamping Angle Gauges

HSK-A 125 Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.

Full Data Sheet (410.230)

PDF Data Sheet: HSK Tool Holder Taper 30 Degree Clamping Angle Gauges (410.230)

Details Ask a Question Request a Quote

Product	Gauge
Part Type	Spindle Taper
Taper / Standard	HSK-A
Taper Size	125
l 6 / JS 10	36.27
HSK B/D/F	HSK 160
d 6	73

HSK A/C/E	HSK B/D/F	l 6 / JS 10	d 6	Part Number
HSK-A 25	HSK 32	7.21	15	410.230.125.000
HSK-A 32	HSK 40	8.92	19	410.230.132.000
HSK-A 40	HSK 50	11.42	23	410.230.140.000
HSK-A 50	HSK 63	14.13	29	410.230.150.000
HSK-A 63	HSK 80	18.13	37	410.230.163.000
HSK-A 80	HSK 100	22.85	46	410.230.180.000
HSK-A 100	HSK 125	28.56	58	410.230.190.000
HSK-A 125	HSK 160	36.27	73	410.230.192.000
HSK-A 160	-	45.98	92	410.230.196.000

For more information regarding this item (HSK-A 125 Tool Holder Taper 30 Degree Clamping Angle Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

Tool Racks Model M8S

To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle.

HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.

HSK Tool Changer Alignment Gauges

Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.

Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.