683.4363
HSK Flanges, Radial/Axial Adjustable
PDF Data Sheet: HSK Flanges, Radial/Axial Adjustable (683.4363)| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C32 | 683.4363.024.060 | |||||||
| HSK-A/C40 | 683.4363.030.070 | |||||||
| HSK-A/C50 | 683.4363.038.080 | |||||||
| HSK-A/C63 | 683.4363.048.100 | |||||||
| HSK-A/C80 | 683.4363.060.117 | |||||||
| HSK-A/C100 | 683.4363.075.140 |
For more information regarding this item (HSK Flanges, Radial/Axial Adjustable) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Flanges, Radial/Axial Adjustable
Interchangeable mounting pattern with 4386 flanges
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
Hydrostatic Grinding Spindles
Radial Diameter: 24 mm Maximum Speed: 35,000 RPM Maximum Radial Load: 800 N Radial Stiffness: 70 N/micro-m Pump and Friction Power: 0.58 kW at 35,000 RPM
Steep Taper (CAT/ANSI) to HSK Adapters
Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).
HSK-E/F CAM-Actuated Flanges
Series 363.048 flanges use a unique cam-actuated clamping cartridge that actuates behind the taper. These flanges are intended for HSK-E/HSK-F tools that do not have drive keys on the taper, however they are also compatible with HSK-A/HSK-C.
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
KM Tool Changer Alignment Gauges
<html> Tool changer alignment gauges verify proper alignment between the tool changer spindle. Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder. In addition, mis-clamping and dropped tools can also occur. <br><br> KM gauges are available for ISO 26622 as well as Mazak Integrex flanges. <br><br> Sets include taper and flange, axial and radial alignment pins, and a padded carrying case. </html>
HSK Taper Adjustable Mounting Fixtures
The Adjustable Mounting Fixture from Transatlantic Connection rotates a full 360 degrees for easy access to all sides of the tool holder. Designed for bench-top mounting.
Submit your feedback