80.303.00
Centro Setup Indicator - Centro Straight Probe Tip with Ball
Full Data Sheet (570.120)
PDF Data Sheet: Centro Setup Indicator (570.120)| Product | Accessory |
| Part Type | Machine Setup Indicator |
| Probe Ø | 2 mm |
| Shaft Ø | - |
| Accuracy | .003 mm |
| Max. Rotation | 150 rpm |
| Item | Probe Ø | Shaft Ø | Accuracy | Max. Rotation | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| Centro Centering Indicator w/ Straight Probe Tip | 5 mm | 16 mm | .003 mm | 150 rpm | 80.300.00 | |||
| - | 16 mm | .003 mm | 150 rpm | 80.300.00.FHN | ||||
| Centro Straight Probe Tip with Ball | 5 mm | - | .003 mm | 150 rpm | 80.301.00 | |||
| Centro Bent Probe Tip with Ball | 5 mm | - | .003 mm | 150 rpm | 80.302.00 | |||
| Centro Straight Probe Tip with Ball | 2 mm | - | .003 mm | 150 rpm | 80.303.00 |
For more information regarding this item (Centro Setup Indicator - Centro Straight Probe Tip with Ball) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Centro Setup Indicator
With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.
Zero Master Analog Setup Indicator
The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.
3D Universal Setup Indicator
Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.
Zero Master Digital Setup Indicator
The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.
3D New Generation Setup Indicator
The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.
Spindle Runout Test Arbor Instructions
One of the leading causes of tool breakage, part finish issues, tolerance control, and machine registration issues is excessive spindle runout.
3D Digital Setup Indicator
The digital display has large numbers that measure in increments of 0,001mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is splash-proof and dust-proof and can be stored in the tool magazine of the machine.
HSK PowerClamp Brass Locking Rings
The pressure ball screw must be secured with Loctite 222. Includes pressure ball screw.
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
PSK Precision Ball-End Runout Test Arbors
Ball-end arbors are typically used on 5-axis machining centers.
Our 467 precision version feature an adjustment mechanism which allows for improved accuracy
Submit your feedback