465.000
Spindle Runout Test Arbors
A Full List of our Standard Runout Test Bars
- Maximum runout error 0.003mm / 3 micron / 0.00012 inch
- Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
- Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
HSK Spindle Runout Test Arbors
- Maximum runout error 0.003mm / 3 micron / 0.00012 inch.
- Carrying cases are not included. Visit Data Sheet 465.006 for available case styles.
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
| Taper | Length (L) | Diameter (D) | Standard | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | 140 mm | 20 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.125.000.000 | ||||
| HSK-A/C/E 32 + B/D/F 40 | 180 mm | 24 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.132.000.000 | ||||
| HSK-A/C/E 40 + B/D/F 50 | 180 mm | 24 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.140.000.000 | ||||
| HSK-A/C/E 50 + B/D/F 63 | 346 mm | 32 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.150.000.000 | ||||
| HSK-A/C/E 63 + B/D/F 80 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.163.000.000 | ||||
| HSK-A/C/E 80 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.180.000.000 | ||||
| HSK-A/C 100 | 349 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.190.000.000 | ||||
| HSK-A/C 100 | 500 mm | 50 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.190.050.500 | ||||
| HSK-A 125 | 349 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.192.000.000 | ||||
| HSK-A 160 | 400 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.196.000.000 | ||||
| HSK-B 80 | 345 mm | 50 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.280.000.000 | ||||
| HSK-F 63 | 346 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.000.000 | ||||
| HSK-F 63 Short | 150 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.040.150 | ||||
| HSK-F 63 | 250 mm | 40 mm | DIN 69893 / ISO 12164 / ASME B5.62 | 465.663.040.250 | ||||
| HSK-F 80 | 346 mm | 50 mm | Makino Flange-Pin Spindles | 465.680.000.000 | ||||
| Custom | Contact us with your requirements | 465.100.SP |
Steep Taper Spindle Runout Test Arbors
-Maximum runout error 0.003mm / 3 micron / 0.00012 inch
-Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch
-Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
-A certificate of accuracy is included. Traceable certificates available; contact us for details.
-Contact us for other lengths, tapers, and other special requirements.
Steep Taper Dual Contact Runout Test Arbors
Compatible with Big-Plus® steep taper spindles.
| Spindle Taper | Length (L) | Diameter (D) | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (BT) 30 Dual Contact | 235 mm | 32 mm | 465.F30.000.000 | |||||
| Steep Taper (BT) 40 Dual Contact | 300 mm | 40 mm | 465.F40.000.000 | |||||
| Steep Taper (BT) 50 Dual Contact | 300 mm | 50 mm | 465.F50.000.000 | |||||
| Steep Taper (CAT/ANSI) 40 Dual Contact | 300 mm | 40 mm | 465.G40.000.000 | |||||
| Steep Taper (CAT/ANSI) 50 Dual Contact | 300 mm | 50 mm | 465.G50.000.000 | |||||
| Steep Taper (DIN) 40 Dual Contact | Contact us | Contact us | 465.H40.000.000 | |||||
| Steep Taper (DIN) 50 Dual Contact | Contact us | Contact us | 465.H50.000.000 | |||||
| Custom Size | Contact us with your requirements | 465.F00.SP |
PSC / PSK Spindle Runout Test Arbors
Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.
| Taper | L (mm) | D (mm) | Length | Standard | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| PSC 30 / C3 | 180 | 25 | Standard | ISO 26623-1 | 465.C03.000.000 | |||
| PSC 40 / C4 | 300 | 35 | Standard | ISO 26623-1 | 465.C04.000.000 | |||
| PSC 40 / C4 | 180 | 25 | Short | ISO 26623-1 | 465.C04.000.001 | |||
| PSC 50 / C5 | 255 | 32 | Standard | ISO 26623-1 | 465.C05.000.000 | |||
| PSC 60 / C6 | 346 | 40 | Standard | ISO 26623-1 | 465.C06.000.000 | |||
| PSC 60 / C6 | 120 | 50 | Short | ISO 26623-1 | 465.C06.000.001 | |||
| PSC 80 / C8 | 346 | 40 | Standard | ISO 26623-1 | 465.C08.000.000 | |||
| PSC 80 / C8 | 175 | 38 | Short | ISO 26623-1 | 465.C08.000.001 | |||
| PSC 100 / C10 | Contact us with your requirements | 465.C10.000.000 | ||||||
| PSC/PSK Custom | Contact us with your requirements | 465.C00.SP |
KM Spindle Runout Test Arbors
- Maximum runout error 0.003mm [0.00012 in.]
- Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).
- A certificate of accuracy is included. Traceable certificates available; contact us for details.
- Contact us for other lengths, tapers, and other special requirements.
* ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.
| Taper | L (mm) | D (mm) | Configuration | Standard | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| KM32 | 70 | 32 | Standard Length | ISO 26622* | 465.K32.000.000 | |||
| KM40 | 80 | 40 | Short Length | ISO 26622* | 465.K40.000.001 | |||
| KM50 | Standard Length | ISO 26622* | 465.K50.000.000 | |||||
| KM50 | 100 | 50 | Short Length | ISO 26622* | 465.K50.000.001 | |||
| KM5040 | Standard Length | KM5040 | 465.K54.000.000 | |||||
| KM63 | 340 | 50 | Standard Length | ISO 26622* | 465.K63.000.000 | |||
| KM63 | 120 | 63 | Short Length | ISO 26622* | 465.K63.000.001 | |||
| KM6350 | 300 | 50 | Standard Length | KM6350 | 465.K65.000.000 | |||
| KM80 | 350 | 50 | Standard Length | ISO 26622* | 465.K80.000.000 | |||
| KM80 | 120 | 80 | Short Length | ISO 26622* | 465.K80.000.001 | |||
| KM100 | 340 | 50 | Standard Length | ISO 26622* | 465.K90.000.000 | |||
| KM100 | 120 | 100 | Short Length | ISO 26622* | 465.K90.000.001 | |||
| KM10080 | 300 | 50 | Standard Length | KM10080 | 465.K98.000.000 | |||
| KM 32...100 | 465.K00.SP |
Morse Taper Spindle Runout Arbors
Morse taper runout arbors offer a quick and easy way to verify correct spindle runout for machines with Morse tapers. Included is a threaded spanner nut to facilitate removable from the Morse spindle.
Arbors are manufactured to standard DIN 229 with a metric thread. Contact us for different sizes or customized versions.
| Description | L (mm) | D (mm) | T (mm) | l1 (mm) | d1 (mm) | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| 465.M00.SP | ||||||||
| 465.M07.000.000 | ||||||||
| Morse Taper MT0 | Contact us | 465.M00.000.000 | ||||||
| Morse Taper MT1 | 200 | 12 | M6x1 | 53.5 | 12.065 | 465.M01.000.000 | ||
| Morse Taper MT2 | 200 | 20 | M10x1.5 | 64 | 17.780 | 465.M02.000.000 | ||
| Morse Taper MT3 | 250 | 25 | M12x1.75 | 81 | 23.825 | 465.M03.000.000 | ||
| Morse Taper MT4 | 300 | 30 | M16x2 | 102.5 | 31.267 | 465.M04.000.000 | ||
| Morse Taper MT5 | 300 | 40 | M20x2.5 | 129.5 | 44.399 | 465.M05.000.000 | ||
| Morse Taper MT6 | 300 | 50 | M24x3 | 182 | 63.348 | 465.M06.000.000 |
R8 Taper Spindle Runout Test Arbor
Standard R8 spindle runout test arbor with inch retention thread.
Runout <=0.003 micron (0.00012 inch)
| Taper | L | D | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| R8 Spindle Taper | 260mm | 31.75mm [1.25in] | 465.R08.000.000 |
For more information regarding this item (Spindle Runout Test Arbors) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
A2 Flanged Lathe Spindle Runout Test Bars
Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.
- Maximum runout error 0.003mm [0.00012 in.]
Runout Arbors for Centers
TAC Rockford runout arbors for lathe centers are manufactured using hardened gauge-quality steel, and include a certificate of accuracy.
Runout Arbor Upright Storage Cases
Our most popular case, the upright storage case protects a runout arbor from dirt and damage. The arbor rests vertically in the case, suspended from the flange. Upright storage of runout arbors is recommended
-- the upright case has foam guides that allow horizontal use if preferred. Case is available in tall and short configurations depending on arbor length. Case is made of 9 ply Baltic Birch.
Heavy-Duty Runout Arbor Travel Cases
The runout arbor travel case is designed for portability while protecting arbors. The case holds two arbors, with additional space for extra retention knobs, indicator, and a magnetic base. The case is virtually indestructible and waterproof. Can be used with padlocks for added security.
Indicators and Bases
TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges.
Available as kits with storage case or individually.
Submit your feedback