683.387
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
- Includes clamping set for conventional cooling - Includes retention screws
PDF Data Sheet: ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079 (683.387)
| Taper | Length (l1) | Ø (d2) | Taper (SK) | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-C 40 | 25 | 50 | SK DIN 30 | 683.4387.030.030 | ||||
| HSK-C 50 | 20 | 63 | SK DIN 40 | 683.4387.040.038 | ||||
| HSK-C 63 | 25 | 80 | SK DIN 50 | 683.4387.050.048 | ||||
| HSK-C 80 | 40 | 100 | SK DIN 50 | 683.4387.050.060 |
For more information regarding this item (ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
Steep Taper (CAT/ANSI) to HSK Adapters
Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).
Steep Taper (DIN) to HSK Adapters
Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.
VDI to HSK-C Basic Adapter Flanges
- For fixed, centered tools
- Includes clamping set
- Includes brass locking ring
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
HSK-C to Steep Taper (ISO) Basic Adapters
- Form B available on request
- Part 683.512.050.100 only applies to presetting unit
- Includes clamping set
- Includes brass locking ring
Steep Taper Spindle Plug Gauges
TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65
Hollow Taper Shank Type C
Preferably for use with spindles in transfer lines and special-purpose machines without automatic tool changing, stub spindles, extensions or reducers. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.
Submit your feedback