291-M

BERG Drawbar Force Gauges

PDF Data Sheet: BERG Drawbar Force Gauges (291-M)

The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.

Sensing Device M-SKThe sensing devices M-SK measure the clamping forces in steep taper (SK) following DIN 6987/1, ISO 7388/1. The standard handheld display supports all different sensing cartridges. It needs just to fit the correct pull stud into the cartridge corresponding to the different standards (DIN, ANSI, JIS, MAS). Steep taper standards away from the DIN 6987/1, ISO 7388/1 may need special adapting pull studs.

Sensing Device M-HSKThe sensing devices M-HSK measure the clamping forces in hollow shaft tool holders (HSK) following DIN 69839. The standard handheld display supports all different
sensing cartridges.

Sensing Device M-CaptoThe sensing devices M-Capto measure the clamping forces in Coromant Capto tool holders. The standard handheld display supports all different sensing cartridges.

For more information regarding this item (BERG Drawbar Force Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Workholding Collet Drawbar Force Gauge

ForceCheck collet force gauges measure the drawbar pullback force of a 5C, 16C, or 20C collet workholding system. Measurement of collet drawbar force provides an easy way to ensure correct force from machine to machine, or between setups for different parts.

Kennametal (KM Taper) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.

Steep Taper (ISO) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Steep Taper (SK) ISO standard spindle.

PSK (PSC) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on Coromant Capto spindles (Polygonal Shank Taper
- PSK).

Drawbar Clamping Force Gauges, Wired

Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.