683.4930.048.100
HSK-C 63 MQL HSK-C 4 Point Manual Clamping Sets
Full Data Sheet (683.930)
PDF Data Sheet: MQL HSK-C 4 Point Manual Clamping Sets (683.930)| Product | Tool Holder |
| Part Type | Manual Clamping |
| Taper / Standard | HSK-C |
| Taper Size | 63 |
| Ø (d1) | 33 |
| Length (l1) | 76 |
| d2 | 6 |
| G | M20 |
| SW1 | 5 |
| SWA | 6 |
| Taper | Length (l1) | Ø (d1) | d2 | G | SW1 | SWA | Part Number | |
|---|---|---|---|---|---|---|---|---|
| HSK-C 32 | 39.5 | 16.7 | 3 | M10 | 2.5 | 3 | 683.4930.024.100 | |
| HSK-C 40 | 49.5 | 20.6 | 4 | M12 | 3 | 4 | 683.4930.030.100 | |
| HSK-C 50 | 59 | 25.5 | 5 | M16 | 4 | 5 | 683.4930.038.100 | |
| HSK-C 63 | 76 | 33 | 6 | M20 | 5 | 6 | 683.4930.048.100 | |
| HSK-C 80 | 98 | 41 | 8 | M24 | 6 | 8 | 683.4930.060.100 | |
| HSK-C 100 | 117.5 | 52 | 10 | M24 | 8 | 10 | 683.4930.075.100 |
Clamping Cartridge Installation Tools
For the installation of 4-point clamping sets, if there are difficulties locking the spindle.
| Installation Tool For Taper | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| HSK-C 25 | 683.4963.019.000 | |||||||
| HSK-C 32 | 683.4963.024.000 | |||||||
| HSK-C 40 | 683.4963.030.000 | |||||||
| HSK-C 50 | 683.4963.038.000 | |||||||
| HSK-C 63 | 683.4963.048.000 | |||||||
| HSK-C 80 | 683.4963.060.000 |
For more information regarding this item (HSK-C 63 MQL HSK-C 4 Point Manual Clamping Sets) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
MQL HSK-C 4 Point Manual Clamping Sets
The central and coaxial MQL supply with constant internal diameter prevents coolant from consolidating. For a coolant pressure up to 80 bar.
HSK-A Extensions with MQL 4 Point Clamping Set
Available for HSK-A / HSK-C 32, 40, 50, 63
Clamping Cartridge Installation Tools
For the installation of 4-point clamping sets, if there are difficulties locking the spindle.
MQL HSK-A Hydraulic Chucks for Manual Tool Change
Clamping diameter for shaft tolerance h6. Available for HSK-A 50, 63, 100.
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
- For a coolant pressure up to 80 bar
- Includes installation and operating instructions
MQL HSK-A Synchro Tapping Chucks
Available for HSK-A 63
MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change
- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6
MQL HSK-A Hydraulic Chucks for Automatic Tool Change
Available for HSK-A 50, 63, 100
MQL-Check Coolant Volume Measuring Instruments
The development of the new MQL-Check allows simple and quick measuring of the coolant volume and the reaction time with minimal quantity lubrication (MQL) directly at the tool point. For the user, the result is a considerable increase in process reliability with MQL machining.
HSK-C Spindle Adapter Flanges
- Includes clamping set for conventional cooling
- Includes brass locking ring
- Includes indexing pin and retention screws
- For MQL application, order as special adaptor with MQL clamping set and MQL retention nut
Submit your feedback