Machine Setup Indicators
The 3D and Centro machine indicators make part setup in a machine incredibly easy.
3D New Generation Setup Indicator
The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.
| Item | Probe Ø | Accuracy | Length | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Analog Sensor, Metric w/ Short Probe | 12 mm | 0.01 mm | 100 mm | 80.360.00NG | ||||
| Short Probe Tip | 4 mm | 0.01 mm | - | 80.362.00 | ||||
| Long Probe Tip | 8 mm | 0.01 mm | - | 80.363.00 |
Zero Master Analog Setup Indicator
The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.
| Item | Probe Dia. | Accuracy | Probe Length | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Analog Probe w/ Short Probe Tip, Metric | 4 mm | 0.01 mm | 25 mm | 80.960.00 | ||||
| Analog Probe w/ Short Probe Tip, Inch | 0.2" | 0.0004" | 1" | 80.960.00.IN | ||||
| Short Probe Tip | 4 mm | 0.01 mm | - | 80.362.00 | ||||
| Long Probe Tip | 8 mm | 0.01 mm | - | 80.363.00 | ||||
| Long 3-D Probe Tip | 0.4" | 2.6" | 80.365.30 |
Zero Master Digital Setup Indicator
The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.
| Item | Probe Ø | Accuracy | Length | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Short Probe Tip | 0.2" | 0.0004" | 1" | 80.365.20 | ||||
| Long Probe Tip | 0.4" | 0.0004" | 2.6" | 80.365.30 |
Centro Setup Indicator
With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.
| Item | Probe Ø | Shaft Ø | Accuracy | Max. Rotation | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| Centro Centering Indicator w/ Straight Probe Tip | 5 mm | 16 mm | .003 mm | 150 rpm | 80.300.00 | |||
| - | 16 mm | .003 mm | 150 rpm | 80.300.00.FHN | ||||
| Centro Straight Probe Tip with Ball | 5 mm | - | .003 mm | 150 rpm | 80.301.00 | |||
| Centro Bent Probe Tip with Ball | 5 mm | - | .003 mm | 150 rpm | 80.302.00 | |||
| Centro Straight Probe Tip with Ball | 2 mm | - | .003 mm | 150 rpm | 80.303.00 |
3D Universal Setup Indicator
Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.
| Item | Shank Ø | Accuracy | Length | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Sensor Universal Analog, Metric | 22 mm | 0.01 mm | 113 mm | 80.360.00 | ||||
| Sensor Universal Analog, Inch | 3/4" | 0.0004" | 1" | 80.360.00.IN | ||||
| Short Probe Tip | 0.2" | 0.0004" | 1" | 80.365.20 | ||||
| Long Probe Tip | 0.4" | 0.0004" | 2.6" | 80.365.30 |
3D Digital Setup Indicator
The digital display has large numbers that measure in increments of 0,001mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is splash-proof and dust-proof and can be stored in the tool magazine of the machine.
| Item | Probe Ø | Accuracy | Length | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| Long 3-D Probe Tip | 0.4" | 2.6" | 80.365.30 | |||||
| 3-D Sensor Digital, Inch | 0.2" | 0.0002" | 1" | 80.460.00.IN | ||||
| Short Probe Tip | 0.2" | 0.0004" | 1" | 80.365.20 |
Submit your feedback