80.301.00

Centro Sensors - Centro Straight Probe Tip with Ball

Centro Sensors - Centro Straight Probe Tip with Ball

Zoom Enlarge Image

Centro Sensors - Centro Straight Probe Tip with Ball

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Centro Sensors - Centro Straight Probe Tip with Ball (Click image to enlarge)
Centro Sensors - Centro Straight Probe Tip with Ball (Click image to enlarge)
Centro Sensors - Centro Straight Probe Tip with Ball (Click image to enlarge)

Full Data Sheet (570.120)

PDF Data Sheet: Centro Sensors (570.120)

Print Data Sheet

Product Accessory
Part Type Machine Setup Indicator
Probe Ø 5 mm
Shaft Ø -
Accuracy .003 mm
Max. Rotation 150 rpm


Item Probe Ø Shaft Ø Accuracy Max. Rotation Part Number
Centro Centering Indicator w/ Straight Probe Tip       5 mm  16 mm  .003 mm    150 rpm  80.300.00
      -  16 mm  .003 mm    150 rpm  80.300.00.FHN
Centro Straight Probe Tip with Ball      5 mm  -  .003 mm    150 rpm  80.301.00
Centro Bent Probe Tip with Ball       5 mm  -  .003 mm    150 rpm  80.302.00
Centro Straight Probe Tip with Ball       2 mm  -  .003 mm    150 rpm  80.303.00

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Centro Sensors - Centro Straight Probe Tip with Ball) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Centro Sensors
Centro Sensors

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Zero Master Analog Sensors
Zero Master Analog Sensors

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

3D Universal Sensors
3D Universal Sensors

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.

HSK Precision Ball-End Runout Test Arbors
HSK Precision Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

HSK PowerClamp Brass Locking Rings
HSK PowerClamp Brass Locking Rings

The pressure ball screw must be secured with Loctite 222. Includes pressure ball screw.

Zero Master Digital Sensors
Zero Master Digital Sensors

The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.

PSK / Capto Precision Ball-End Runout Test Arbors
PSK / Capto Precision Ball-End Runout Test Arbors

Ball-end arbors are typically used on 5-axis machining centers, but can also be used in place of a standard runout arbor if ultra-precision is required.

KM Precision Ball-End Runout Test Arbors
KM Precision Ball-End Runout Test Arbors

Ball-end arbors are typically used on 5-axis machining centers, but can also be used in place of a standard runout arbor if ultra-precision is required.

Steep Taper Precision Ball-End Runout Test Arbors
Steep Taper Precision Ball-End Runout Test Arbors

Ball-end arbors are typically used on 5-axis machining centers, but can also be used in place of a standard runout arbor if ultra-precision is required.

Steep Taper Standard Ball-End Runout Test Arbors
Steep Taper Standard Ball-End Runout Test Arbors

Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).

Page loaded in 0.0712 seconds.