683.554.024.000 HSK-C PowerClamp Manual Clamping Sets - HSK-C 32

HSK-C PowerClamp Manual Clamping Sets - HSK-C 32

- For coolant up to 80 bar - Includes installation and operating instructions - Includes threaded pin

PDF Data Sheet: HSK-C PowerClamp Manual Clamping Sets (683.554)

Product	Tool Holder
Part Type	Manual Clamping
Taper Size	32
Length (l1)	41.6
SW	2.5

Taper	Length (l1)	SW	Part Number
HSK-C 25	32.1	2.0	683.554.019.000
HSK-C 32	41.6	2.5	683.554.024.000
HSK-C 40	49.7	3.0	683.554.030.000
HSK-C 50	62.2	4.0	683.554.038.000
HSK-C 63	74.1	5.0	683.554.048.000
HSK-C 80	96.1	6.0	683.554.060.000
HSK-C 100	117.0	8.0	683.554.075.000

For more information regarding this item (HSK-C PowerClamp Manual Clamping Sets - HSK-C 32) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK-C PowerClamp Manual Clamping Sets

- For coolant up to 80 bar
- Includes installation and operating instructions
- Includes threaded pin

HSK-C 4 Point Manual Clamping Sets for Conventional Cooling

- For a coolant pressure up to 80 bar
- Includes installation and operating instructions

KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

MQL HSK-C 4 Point Manual Clamping Sets

The central and coaxial MQL supply with constant internal diameter prevents coolant from consolidating. For a coolant pressure up to 80 bar.

KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

Clamping Cartridge Installation Tools

For the installation of 4-point clamping sets, if there are difficulties locking the spindle.

Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.