430.110

Tool Holder Taper Sleeve Gauges

Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65

PDF Data Sheet: Tool Holder Taper Sleeve Gauges (430.110)

Taper Part Number
Steep Taper 30                 430.110.830.000
Steep Taper 40                 430.110.840.000
Steep Taper 45                 430.110.845.000
Steep Taper 50                 430.110.850.000
Steep Taper 55                 430.110.855.000
Steep Taper 60                 430.110.860.000
Steep Taper 65                 430.110.865.000
Steep Taper (ISO) 10                 430.110.A10.000
Steep Taper (ISO) 15                 430.110.A15.000
Steep Taper (ISO) 20                 430.110.A20.000
Steep Taper (ISO) 25                 430.110.A25.000

Also known as taper pots, TAC Rockford tool holder taper sleeve gauges are designed to inspect steep taper (CAT V-flange) tool holder tapers for wear, fretting, high spots, and other defects. By using a non-drying Dykem or similar blueing compound, potential problems with proper seating of the tool holder can be detected.

By placing taper gauge on a granite surface, gauges can also be used for measuring tool holder offset from the gauge line.

Taper gauges are manufactured per DIN 2080, but can be used with any steep taper type (CAT-V, BT, MAS, DIN, ISO, etc.)

An inspection certificate and carrying case are included with gauges.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Tool Holder Taper Sleeve Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Morse Tool Holder Taper Sleeve Gauges
Morse Tool Holder Taper Sleeve Gauges

TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.

Tool Holder Taper Inspection Gauge
Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

ForceCheck Hydraulic Tool Holder Force Gauges
ForceCheck Hydraulic Tool Holder Force Gauges

Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece. ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve. Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.

Series 410 Dial Indicator Tool Taper Gauges
Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Tool Holder Taper Check Gauges
Tool Holder Taper Check Gauges

<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a> <br><br> <b>Features</b> <ul> <li>Maximize tool life and spindle life</li> <li>Ensure tool holder performance</li> <li>Tool holder can be tested with components assembled, and works with retention knob installed</li> <li>Includes (A) and (B) indicators with 0.0001" resolution</li> <li>Carbide locating pins for long life</li> <li>Made with hardened tool steel body</li> <li>Comes with master shank (C)</li> </ul> <br>

Series 968 HSK Tool Holder Taper Gauges
Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

Morse Spindle Taper Plug Gauges
Morse Spindle Taper Plug Gauges

TAC Rockford Morse spindle taper gauges are for inspection of Morse spindle tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.

HSK Certified Master Taper Gauge
HSK Certified Master Taper Gauge

These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.

Workbench Tool Mounting Fixtures
Workbench Tool Mounting Fixtures

682.126 mounting fixtures have been discontinued. Link below for available alternatives. Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.

Page loaded in 0.129 seconds.