495.800
ForceCheck Chuck Force Sensor Extensions and Accessories
Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.
PDF Data Sheet: ForceCheck Chuck Force Sensor Extensions and Accessories (495.800)
Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.
Rest Pads • Flat rest pads are made with hardened steel for durability and repeatability
• "Radiused" rest pads are designed for better centering on the chuck jaws during force measurement – recommended to also use with an insertion depth control ring
• Special diameter rest pads are where the customer specifies the overall clamping diameter and number of jaws when ordering
Insertion Depth Control RingUnique to ForceCheck chuck gauges, this is a special accessory that prevents the force sensor from slipping or being misaligned during measurement. This can prevent damage to unit if the sensor is not properly centered inside the chuck (where the chuck jaws are gripping the rest pads at precisely the same instance), or the chuck force gauge is positioned at a bad angle not allowing each sensor gripping pad to be parallel and flush with the chuck jaws.
The insertion depth ring solves alignment issues along with providing a continuous force reading after each use – it ensures the chuck force sensor is correctly positioned every time.
Support RingPart of an extension rest pad set for larger chuck clamping diameters, the support ring adds stability and proper centering of the rest pads.
For more information regarding this item (ForceCheck Chuck Force Sensor Extensions and Accessories) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Wireless Chuck Force Sensor Manual
The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.
Wireless Chuck Force Sensor Sets
Suitable for measuring RPM and force at the same time. These are complete sets that include sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case. Contact us for custom sizes and multi-adapter sets.
Wireless Chuck Force Gauges
The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.
ForceCheck Hydraulic Tool Holder Force Gauges
Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece. ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve. Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems. <p>Applications for ForceCheck workholding collet force gauges include:</p> <ul> <li>Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)</li> <li>Periodic verification to assess if preventive maintenance is needed</li> <li>Establish correct holding force for running a particular part or job</li> <li>Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining</li> </ul> <p>A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).</p> <p>Sensors are also available in low-force versions. Contact us for further information.</p>
Wireless Sensor Operating Instructions
The ForceCheck wireless sensor measures the clamping force of power drawbars on machining centers. Designed for use with the ForceCheck Wireless Display (461.110). Download or print PDF data sheet for instruction manual.
Drawbar Force Base Unit and Accessories
Various accessories, base sets, and custom items for the ForceCheck system.
Submit your feedback