495.800.510.125

Insertion Depth Control Ring for D125 Chuck Force Sensor

D125 Insertion Depth Control Ring

Zoom Enlarge Image

D125 Insertion Depth Control Ring

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

D125 Insertion Depth Control Ring (Click image to enlarge)
Insertion Depth Control Ring for D125 Chuck Force Sensor (Click image to enlarge)

Full Data Sheet (495.800)

PDF Data Sheet: Chuck Force Sensor Extensions and Accessories (495.800)


Accessory For Sensor (Diameter) Part Number
Flat Rest Pad Replacement Kit (Hardened Steel)           D72      495.800.501.072
Flat Rest Pad Replacement Kit (Hardened Steel)           D125      495.800.501.125
Radiused Rest Pad Replacement Kit (Soft Steel)           D72      495.800.502.072
Radiused Rest Pad Replacement Kit (Soft Steel)           D125      495.800.502.125
Support Ring           D72      495.800.505.072
Support Ring           D125      495.800.505.125
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter           D28      495.800.506.028-N-D
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter           D72      495.800.506.072-N-D
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter           D125      495.800.506.125-N-D
Insertion Depth Control Ring           D72      495.800.510.072
Insertion Depth Control Ring          D125      495.800.510.125

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Insertion Depth Control Ring for D125 Chuck Force Sensor) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Wireless Chuck Force Gauges
Wireless Chuck Force Gauges

The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.

Wireless Chuck Force Sensor Manual
Wireless Chuck Force Sensor Manual

The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).

Wireless Chuck Force Sensor Sets
Wireless Chuck Force Sensor Sets

Suitable for measuring RPM and force at the same time. These are complete sets that include sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case. Contact us for custom sizes and multi-adapter sets.

Machine-Integrated Drawbar Force Gauges
Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Large Diameter VTL Chuck Force Gauges
Large Diameter VTL Chuck Force Gauges

Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.

Lathe Spindle Face Ring
Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

SPH Pallet Clamping Heads
SPH Pallet Clamping Heads

BERG Spanntechnik series SPH clamping heads are primarily used for horizontal pallet clamping. The heads form the basis of a highly rigid, high precision repeatable workholding solution. In addition to clamping heads, non-active units are available for setup and storage stations. Heads are supplied as a matched set with 0.005mm accuracy.

ForceCheck Hydraulic Tool Holder Force Gauges
ForceCheck Hydraulic Tool Holder Force Gauges

Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece. ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve. Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.

Page loaded in 0.1686 seconds.