Machine Setup Indicators

The 3D and Centro machine indicators make part setup in a machine incredibly easy.

3D New Generation Sensors
3D New Generation Sensors

The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

Details PDF (570.110)

Item Probe Ø Accuracy Length Part Number
Analog Sensor, Metric w/ Short Probe       12 mm    0.01 mm  100 mm    80.360.00NG
Short Probe Tip       4 mm    0.01 mm  -    80.362.00
Long Probe Tip       8 mm    0.01 mm  -    80.363.00

Zero Master Analog Sensors
Zero Master Analog Sensors

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

Details PDF (570.111)

Item Probe Dia. Accuracy Probe Length Part Number
Short Probe Tip       4 mm    0.01 mm  -    80.362.00
Long Probe Tip       8 mm    0.01 mm  -    80.363.00
Long 3-D Probe Tip       0.4"      2.6"    80.365.30
Analog Probe w/ Short Probe Tip, Metric       4 mm    0.01 mm  25 mm    80.960.00
Analog Probe w/ Short Probe Tip, Inch       0.2"    0.0004"  1"    80.960.00.IN

Zero Master Digital Sensors
Zero Master Digital Sensors

The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.

Details PDF (570.112)

Item Probe Ø Accuracy Length Part Number
Short Probe Tip       0.2"    0.0004"  1"    80.365.20
Long Probe Tip       0.4"    0.0004"  2.6"    80.365.30

Centro Sensors
Centro Sensors

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Details PDF (570.120)

Item Probe Ø Shaft Ø Accuracy Max. Rotation Part Number
Centro Centering Indicator w/ Straight Probe Tip       5 mm  16 mm  .003 mm    150 rpm  80.300.00
      -  16 mm  .003 mm    150 rpm  80.300.00.FHN
Centro Straight Probe Tip with Ball       5 mm  -  .003 mm    150 rpm  80.301.00
Centro Bent Probe Tip with Ball       5 mm  -  .003 mm    150 rpm  80.302.00
Centro Straight Probe Tip with Ball       2 mm  -  .003 mm    150 rpm  80.303.00

3D Universal Sensors
3D Universal Sensors

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.

Details PDF (570.121)

Item Shank Ø Accuracy Length Part Number
Sensor Universal Analog, Metric       22 mm    0.01 mm  113 mm    80.360.00
Sensor Universal Analog, Inch       3/4"    0.0004"  1"    80.360.00.IN
Short Probe Tip       0.2"    0.0004"  1"    80.365.20
Long 3-D Probe Tip       0.4"      2.6"    80.365.30

3D Digital Sensors
3D Digital Sensors

The digital display has large numbers that measure in increments of 0,001mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is splash-proof and dust-proof and can be stored in the tool magazine of the machine.

Details PDF (570.122)

Item Probe Ø Accuracy Length Part Number
Short Probe Tip       0.2"    0.0004"  1"    80.365.20
Long 3-D Probe Tip       0.4"      2.6"    80.365.30
3-D Sensor Digital, Inch       0.2"    0.0002"  1"    80.460.00.IN

Page loaded in 0.1876 seconds.