80.303.00

Centro Setup Indicator - Centro Straight Probe Tip with Ball

Centro Setup Indicator - Centro Straight Probe Tip with Ball

Zoom Enlarge Image

Centro Setup Indicator - Centro Straight Probe Tip with Ball

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Centro Setup Indicator - Centro Straight Probe Tip with Ball (Click image to enlarge)
Centro Setup Indicator - Centro Straight Probe Tip with Ball (Click image to enlarge)
Centro Setup Indicator - Centro Straight Probe Tip with Ball (Click image to enlarge)

Full Data Sheet (570.120)

PDF Data Sheet: Centro Setup Indicator (570.120)

Product Accessory
Part Type Machine Setup Indicator
Probe Ø 2 mm
Shaft Ø -
Accuracy .003 mm
Max. Rotation 150 rpm


Item Probe Ø Shaft Ø Accuracy Max. Rotation Part Number
Centro Centering Indicator w/ Straight Probe Tip       5 mm  16 mm  .003 mm    150 rpm  80.300.00
      -  16 mm  .003 mm    150 rpm  80.300.00.FHN
Centro Straight Probe Tip with Ball       5 mm  -  .003 mm    150 rpm  80.301.00
Centro Bent Probe Tip with Ball       5 mm  -  .003 mm    150 rpm  80.302.00
Centro Straight Probe Tip with Ball      2 mm  -  .003 mm    150 rpm  80.303.00

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Centro Setup Indicator - Centro Straight Probe Tip with Ball) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Centro Setup Indicator
Centro Setup Indicator

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

Zero Master Analog Setup Indicator
Zero Master Analog Setup Indicator

The Zero Master is the smallest 3D-Sensor worldwide. Usage, function and accuracy are equal to the Universal 3D-Sensor. The size of the Zero Master is adapted to small machines. The clamping shank has a diameter of 10 mm. Thus it can be also used on machines with ISO 30 or with small HSK spindles. The housing is shortened and does not protrude far out of the spindle so that even big work pieces can be measured. The Zero Master can be read with a small analog dial gauge.

3D Universal  Setup Indicator
3D Universal Setup Indicator

Short and long probes are available. The sensor probes may be changed without any tool. No re-calibration of the unit is needed during a sensor probe change over. Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine.

Zero Master Digital Setup Indicator
Zero Master Digital Setup Indicator

The dial gauge indicates the distance between spindle axis and workpiece edge. As soon as the gauge shows zero, the spindle axis is exactly on the workpiece edge on the first attempt. This eliminates calculating or problems with positive or negative signs.

3D New Generation Setup Indicator
3D New Generation Setup Indicator

The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.

Spindle Runout Test Arbor Instructions
Spindle Runout Test Arbor Instructions

One of the leading causes of tool breakage, part finish issues, tolerance control, and machine registration issues is excessive spindle runout.

3D Digital Setup Indicator
3D Digital Setup Indicator

The digital display has large numbers that measure in increments of 0,001mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is splash-proof and dust-proof and can be stored in the tool magazine of the machine.

HSK PowerClamp Brass Locking Rings
HSK PowerClamp Brass Locking Rings

The pressure ball screw must be secured with Loctite 222. Includes pressure ball screw.

HSK Dial Indicator Spindle Taper Gauge Manual
HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

KM Precision Ball-End Runout Test Arbors
KM Precision Ball-End Runout Test Arbors

Our 467 precision version feature an adjustment mechanism which allows for improved accuracy when compared to our standard 466 ball arbors.

Page loaded in 0.136 seconds.