Dimensional HSK Spindle Gauges
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
| HSK | d2 | l 2 | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 32 + HSKB/D/F 40 | 24 | 3.2 | 410.310.132.000 | |||||
| HSK-A/C/E 40 + HSKB/D/F 50 | 30 | 4 | 410.310.140.000 | |||||
| HSK-A/C/E 50 + HSKB/D/F 63 | 38 | 5 | 410.310.150.000 | |||||
| HSK-A/C/E 63 + HSKB/D/F 80 | 48 | 6.3 | 410.310.163.000 | |||||
| HSK-A/C/E 80 + HSKB/D/F 100 | 60 | 8 | 410.310.180.000 | |||||
| HSK-A/C 100 + HSKB/D/F 125 | 75 | 10 | 410.310.190.000 | |||||
| HSK-A 125 | 95 | 12.5 | 410.310.192.000 | |||||
| HSK-A 160 | 120 | 16 | 410.310.196.000 |
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.
| Taper | b1±0.05 | r1±0.025 | e1 | e2 | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A 32 | 6.8 | 1.5 | 8.905 | 4.903 | 410.330.132.000 | |||
| HSK-A 40 | 7.8 | 2.0 | 11.081 | 5.903 | 410.330.140.000 | |||
| HSK-A 50 | 10.3 | 2.5 | 13.997 | 7.648 | 410.330.150.000 | |||
| HSK-A 63 | 12.3 | 3.0 | 18.110 | 9.150 | 410.330.163.000 | |||
| HSK-A 80 | 15.8 | 4.0 | 22.073 | 11.898 | 410.330.180.000 | |||
| HSK-A 100 | 19.78 | 5.8 | 27.561 | 14.888 | 410.330.190.000 | |||
| HSK-A 125 | 24.78 | 6.0 | 35.580 | 18.388 | 410.330.192.000 | |||
| HSK-A 160 | 29.78 | 8.0 | 44.538 | 22.888 | 410.330.196.000 |
Pneumatic HSK Spindle Gauge Kits
Gauging kit for HSK spindles with pneumatic measuring system. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
Submit your feedback