683.582
HSK PowerClamp Adapter Flanges for Turning Machines
- For fixed tools - Includes setting element to eliminate drive play with vertical tools - Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screws
PDF Data Sheet: HSK PowerClamp Adapter Flanges for Turning Machines (683.582)
| Taper (d1) | Length (l1) | Ø (d2) | d3 | l2 | l3 | SW | Version | Part Number |
|---|---|---|---|---|---|---|---|---|
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Right | 683.4582.048.200 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Left | 683.582.038.100 |
| HSK-C 50 | 35 | 84 | 50 | 55.0 | 55 | 4 | Right | 683.582.038.200 |
| HSK-C 63 | 40 | 100 | 63 | 64.5 | 70 | 5 | Left | 683.582.048.100 |
Product Information • For fixed tools
• Includes setting element to eliminate drive play with vertical tools
• The interface between spindle and flange must be taken into consideration for the transferable torsional moment
Scope of Delivery • Includes clamping set
• Includes brass locking ring
• Includes indexing pin and retention screws
For more information regarding this item (HSK PowerClamp Adapter Flanges for Turning Machines) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
HSK-C Locking Rings for Adapter Flanges
Available for HSK-C 25, 32, 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
PSK/PSC Adaptor Flanges
Capto (Polygonal Taper) adapter flanges are a one-piece design available for C3, C4, C5, C6, C8 PSC tapers. Ideal for tool holder blank building or other mounting capabilities with the Coromant Capto tool holder system.
HSK-E/F CAM-Actuated Flanges
Series 363.048 flanges use a unique cam-actuated clamping cartridge that actuates behind the taper.
These flanges are intended for HSK-E/HSK-F tools that do not have drive keys on the taper, however they are also compatible with HSK-A/HSK-C.
Submit your feedback