ISO and DIN HSK Standard Comparison

Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

Dial Indicator Spindle Taper Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.

HSK Tool Holder Drive Key Gauge Manual

Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).

Download or print PDF data sheet for complete instructions.

Steep Taper Grippers SSKE-KH

SSKE-KH grippers are designed for applications requiring a shorter drawbar stroke.

HSK-A Reducers

Available for HSK-A 50, 63, 80, 100

HSK-A Extensions

Available for HSK-A 50, 63, 80, 100

HSK-A Reduction Sleeves for Morse Tapers with Thread

Available for HSK-A 50, 63, 80, 100

Steep Taper Grippers SSKF

With an easy-to-machine spindle contour, BERG Spanntechnik SSKF gripper is designed for cost-sensitive applications.