495.200 ForceCheck Chuck Force Gauges - Wired

Measures the holding force on turning-centers, chucks, or lathes

ForceCheck Chuck Force Gauges - Wired (Click image to enlarge)

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Products Details Ask a Question Request a Quote

Measuring Diameter	Jaws	Diameter	Force Range (per Jaw)	Part Number
D28	2 / 3	28 mm / 1.10 in.	0...15kN / 3,400 lb-F	495.200.028.003
D72	2 / 3	72 mm / 2.83 in.	0...50kN / 11,200 lb-F	495.200.072.003
D125	2 / 3 / 4	125 mm / 4.92 in.	0...65kN / 14,600 lb-F	495.200.125.004
D200	2 / 3 / 4 / 6	200 mm / 7.87 in.	0...100kN / 22,500 lb-F	495.200.200.006
D28 (Low Force)	2 / 3	28 mm / 1.10 in.	Contact us	495.200.028.003.LF
D72 (Low Force)	2 / 3	72 mm / 2.83 in.	Contact us	495.200.072.003.LF
D125 (Low Force)	2 / 3 / 4	125 mm / 4.92 in.	Contact us	495.200.125.004.LF
D200 (Low Force)	2 / 3 / 4 / 6	200 mm / 7.87 in.	Contact us	495.200.200.006.LF

ForceCheck Force Gauge Base Set - Wired

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details PDF (461.310)

								Part Number
ForceCheck Base Set								461.310.000.000

Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Details PDF (495.800)

Accessory	For Sensor (Diameter)	Part Number
Flat Rest Pad Replacement Kit (Hardened Steel)	D72	495.800.501.072
Flat Rest Pad Replacement Kit (Hardened Steel)	D125	495.800.501.125
Radiused Rest Pad Replacement Kit (Soft Steel)	D72	495.800.502.072
Radiused Rest Pad Replacement Kit (Soft Steel)	D125	495.800.502.125
Support Ring	D72	495.800.505.072
Support Ring	D125	495.800.505.125
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter	D28	495.800.506.028-N-D
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter	D72	495.800.506.072-N-D
Special Diameter Rest Pad Set, N=Jaws, D=Clamping Diameter	D125	495.800.506.125-N-D
Insertion Depth Control Ring	D72	495.800.510.072
Insertion Depth Control Ring	D125	495.800.510.125

The ForceCheck wired chuck force gauge is designed to quickly and accurately measure holding force on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force, as well as perform critical preventative maintenance checks.

SpecificationsTwo standard sizes are available:
• Diameter 72mm, for measuring 2 and 3 jaw chucks.
• Diameter 125mm, for measuring 2, 3, and 4 jaw chucks.
• Custom sensors are available for any size chuck. Contact us for more information.

For soft jaws, customized radiused extension kits are available to fit specific diameters. Stop rings are available for controlling insertion depth.

For more information regarding this item (ForceCheck Chuck Force Gauges - Wired) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm