Steep Taper (DIN69871) Tool Holder Blanks

Steep Taper (MAS 403 BT) Tool Holder Blanks

30, 40, and 50 steep taper MAS 403 BT blanks are available from TAC Rockford.

BT-DC Steep Taper Tool Holder Blanks

40 and 50 steep taper BT Dual Contact blanks are available from TAC Rockford.

Steep Taper Spindle Wipers

Used to clean lubricant and debris from inside the spindle to prevent slipping and poor face contact with the taper. Made with plastic and soft fiber pads for safe contact inside spindles. Recommended cleaning accessory before gauging and performing measurements inside the spindle.

Tool Holder Taper Complete Measuring Units

Calibrated with a gauge master, the taper gauge checks large taper diameter, small taper diameter, straightness of the taper, relationship of the flange to the taper, and taper length.

Steep Taper Tool Changer Alignment Gauges

Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.

HSK Tool Holder Taper Wipers

Used for cleaning the external taper and face.

Tool Holder Taper Check Gauges

<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>

<b>Features</b>

-Maximize tool life and spindle life

-Ensure tool holder performance

-Tool holder can be tested with components assembled, and works with retention knob installed

-Includes (A) and (B) indicators with 0.0001" resolution

-Carbide locating pins for long life

-Made with hardened tool steel body

-Comes with master shank (C)

Tool Holder Taper Sleeve Gauges

Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65