410.210M

Series 280 HSK Tool Holder Taper Gauge Instructions

Download or print PDF data sheet for instruction manual.

PDF Data Sheet: Series 280 HSK Tool Holder Taper Gauge Instructions (410.210M)

For more information regarding this item (Series 280 HSK Tool Holder Taper Gauge Instructions) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

HSK Tool Holder Drive Key Gauge Manual

Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).

Download or print PDF data sheet for complete instructions.

Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

Maintain machining accuracy and extend spindle life with our high-precision Taper Inspection Gauge. Designed for the machine shop floor, this system allows operators to identify critical taper wear and deformation before it leads to scrapped parts or costly spindle damage.

Rapid Diagnostics: Verify tool holder integrity in seconds with a simple, repeatable process.

High Resolution: Compatible with compact 3/8" stem indicators. Indicators not included: resolutions of 0.002mm and 0.0001 inch available from TAC Rockford.

Portable: Includes heavy-duty Fixture Base and a custom-fitted carrying case to keep your precision instrument protected in industrial environments.

Flexible Calibration: While the 430.100 Certified Taper Master is recommended, the system is designed to work with a "known good" tool holder for quick shop-floor referencing.

Please note that the taper inspection gauge will only check diameter on two planes on the taper. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

Tool Holder Drive Key Tool Taper Gauges

Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Tool Holder Taper Complete Measuring Units

Calibrated with a gauge master, the taper gauge checks large taper diameter, small taper diameter, straightness of the taper, relationship of the flange to the taper, and taper length.

Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

Maintain machining accuracy and extend spindle life with our high-precision Taper Inspection Gauge. Designed for the machine shop floor, this system allows operators to identify critical taper wear and deformation before it leads to scrapped parts or costly spindle damage.

Rapid Diagnostics: Verify tool holder integrity in seconds with a simple, repeatable process.

High Resolution: Compatible with 8mm stem indicators. Indicators not included: resolutions of 0.001mm, 0.0005mm, or 0.00005" available from TAC Rockford.

Portable: Includes two heavy-duty Fixture Bases and a custom-fitted carrying case to keep your precision instruments protected in industrial environments.

Flexible Calibration: While the 410.148 Certified Taper Master is recommended, the system is designed to work with a "known good" tool holder for quick shop-floor referencing.

Additional product information can be found on the Details tab below.

Drawbar Stroke Verification Gauges

Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.