320.001

Gutekunst Spring Clips

Gutekunst Spring Clips (Click image to enlarge)
Gutekunst Spring Clips (Click image to enlarge)

Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).

PDF Data Sheet: Gutekunst Spring Clips (320.001)

Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).

We can manufacture for you spring clips from the following materials:
1.4310, C 75 S, CuSn6, CuBe2 as well as any supplied special material

• The strip thickness ranges between 0.3 and 2.5 mm
• The strip width ranges between 5.0 and 60 mm


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Gutekunst Spring Clips) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Wire-Rope Clips with Spring-Operating Storage
Wire-Rope Clips with Spring-Operating Storage

Wire-rope clips for cable lifts and chair lifts for wire-rope diameters from 13-32 mm. Our wire-rope clips with spring-operating storage and pendular-break meet the highest demands concerning quality in the ski-lift industry. The clips are manufactured from highly forged heat-treated steel and therefore show the highest qualities concerning lifetime and wear. Because of design and state-of-the-art engineering this component features the highest ride comfort and operational safety.

Spring Band Steel
Spring Band Steel

We supply spring band steel either as pre-cut blanks or in coils with thickness values of 0.1 to 3.0 mm and widths of 2.0 - 120 mm. Available materials: 1.4310, 1.4301, C 75 S, C 100 S, CuSn6, CuZn37 as well as CuBe2

Special Multi-Characteristic Springs
Special Multi-Characteristic Springs

Röhrs special springs with two characteristics are a specialty, in which two spring characteristics are combined into one spring.

Spring Stacks
Spring Stacks

Spring stacks are used in machining spindles for mechanically generating the actuation force for the clamping means.

Spring Combinations and Sets
Spring Combinations and Sets

Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.

Compression Springs Overview
Compression Springs Overview

Steel springs from Gutekunst are manufactured using spring steel wire material no.1.4310 in compliance with EN 10270 part 3 (AISI 302 / BS 301S21). The tolerances of the wire diameters comply with DIN 2076.

Square Springs
Square Springs

We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.

Helical Disk Spring Power Packs
Helical Disk Spring Power Packs

This power pack is composed of a quadruplicated screwed together helical disk spring. It is applied in hydrogen fuel cells featuring a high energy density for instance (e.g. satellites / submarines).

Bent Wire Parts
Bent Wire Parts

We use the following materials in any variant in manufacturing wire bent parts for our clients: 1.4310, 1.4301, 1.1200, plus any special material you may request or supply. We offer the following range of dimensions: wire thickness values of 0.2 to 4.0 mm.

Page loaded in 0.1446 seconds.