681.012.1402
Laip HSK-A Whistle-Notch Holders
For end mills with shank DIN 1835-B and / or DIN 1835-E
For end mills with shank DIN 1835-B and / or DIN 1835-E. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.
PDF Data Sheet: Laip HSK-A Whistle-Notch Holders (681.012.1402)
DIN 69882-5 • The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision.
• Coolant tube to be ordered separately.
• Balanced according to ISO 1940-1 up to 10,000 rpm. We have the latest methods for dynamic balancing up to 50,000 rpm.
• D1 <= 25 mm: two clamping holes.
• Maximum circular deviation between outer taper and D1 <= 0.003 mm.
For more information regarding this item (Laip HSK-A Whistle-Notch Holders) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A Side Lock Holders (Whistle Notch)
Available for HSK-A 32, 40, 50, 63, 80, 100
HSK-C Side Lock Holders
Available for 32, 40, 50, 63
HSK-C Weldon and Whistle-Notch Holders
The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available for HSK-C 32, 40, 50, 63.
HSK-A Reduction Sleeves for Straight Shanks with Inclined Clamping Surface (Whistle Notch)
Available for HSK-A 40, 50, 63, 80, 100
HSK-A to HSK-A/C Extensions and Reducing Adapters
For DIN 69 893-1 Form A and C tool holders. Prepared for MAPAL clamping system. Available for HSK-A 50, 63, 80, 100, 125.
HSK Standards
Contact us for HSK standards documentation
HSK-C to Steep Taper (DIN 2080) Basic Adapters
- With ring notch for Ott clamping system
- Includes clamping set
- Includes brass locking ring
- Order clamping key and draw-in bolt separately
HSK-E Weldon Holders
The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available to HSK-E 25, 32, 40, 50, 63.