687.KS

KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

PDF Data Sheet: KS Clamping Cartridges (Standard) (687.KS)

HSK Taper Hex Key Size Tighten To Part Number
HSK-A/C 32       3 mm    6 Nm      355.611.032.000
HSK-A/C 40       3 mm    7 Nm      355.611.040.000
HSK-A/C 50       4 mm    15 Nm      355.611.050.000
HSK-A/C 63       5 mm    20 Nm      355.611.063.000
HSK-A/C 80       6 mm    30 Nm      355.611.080.000
HSK-A/C 100       8 mm    50 Nm      355.611.090.000

KS Assembly Spanners

Used for mounting on machine spindles and adapters as a manual tool holding device for HSK tools.

NoteIn case of damages to individual parts, the cartridges can be replaced on request in the repair exchange.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (KS Clamping Cartridges (Standard)) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

KS Assembly Spanners
KS Assembly Spanners

Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.

KS Installation Tools
KS Installation Tools

Available for HSK-C 32, 40, 50, 63, 80, 100

KS Clamping Cartridges for High Pressure
KS Clamping Cartridges for High Pressure

Available HSK-C 32, 40, 50, 63, 80, 100

3D Printing Replacement Cartridges
3D Printing Replacement Cartridges

A true industrial thermoplastic, ABS is widely used throughout industry. When combined with a Dimension Elite system, P430 ABS is ideal for 3D printing of models in the engineering office.

Drawbar Force Gauges
Drawbar Force Gauges

The BERG clamping force measuring system for the tool holders is designed for force measurement when the spindle is stationary! The measuring system consists of a handy sturdy display device in pocket calculator format and the measuring equipment required for the various application. The measured data can be transferred to any WIN 9x/NT PC via a serial standard inter face and represented in y/t. The measuring system includes a practical case for accommodating the display device, the measuring equipment, the charger and the connecting cable.

PSK/PSC/Capto Manual Cartridges
PSK/PSC/Capto Manual Cartridges

PSK/PSC/Capto Manual Cartridges

Clamping Cartridge Installation Tools
Clamping Cartridge Installation Tools

For the installation of 4-point clamping sets, if there are difficulties locking the spindle.

KS Clamping Cartridges for Minimal Lubrication (MLC)
KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

Page loaded in 0.3706 seconds.