455.110.125.000
HSK-A/C/E/T 25 Master Setting Gauges
Product | Gauge |
Part Type | Center Height |
Taper / Standard | HSK-A/C/E/T |
Taper Size | 25 |
L (mm) | Contact us |
Taper | L (mm) | D (mm) | f1 (mm) | Part Number | ||||
---|---|---|---|---|---|---|---|---|
HSK-A/C/E/T 25 | Contact us | 455.110.125.000 | ||||||
HSK-A/C/E/T 32 | Contact us | 455.110.132.000 | ||||||
HSK-A/C/E/T 40 | 60 | 40 | 27 | 455.110.140.000 | ||||
HSK-A/C/E/T 50 | 70 | 50 | 35 | 455.110.150.000 | ||||
HSK-A/C/E/T 63 | 80 | 63 | 45 | 455.110.163.000 | ||||
HSK-A/C/E/T 80 | 80 | 80 | 50 | 455.110.180.000 | ||||
HSK-A/C/T 100 | 85 | 100 | 60 | 455.110.190.000 | ||||
HSK-A/C/T 125 | 90 | 125 | 75 | 455.110.192.000 | ||||
HSK-F63 63 | 80 | 63 | 45 | 455.110.663.000 | ||||
HSK-F80 80 | 80 | 80 | 50 | 455.110.680.000 |
For more information regarding this item (HSK-A/C/E/T 25 Master Setting Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a> <br><br> <b>Features</b> <ul> <li>Maximize tool life and spindle life</li> <li>Ensure tool holder performance</li> <li>Tool holder can be tested with components assembled, and works with retention knob installed</li> <li>Includes (A) and (B) indicators with 0.0001" resolution</li> <li>Carbide locating pins for long life</li> <li>Made with hardened tool steel body</li> <li>Comes with master shank (C)</li> </ul> <br>
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Series 968 HSK Tool Holder Taper Gauges
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.