461.200.L
ForceCheck Sensor for Lyndex-Nikken NC5
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
PDF Data Sheet: ForceCheck Sensor for Lyndex-Nikken NC5 (461.200.L)
| ForceCheck Sensor, Wired | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| Lyndex-Nikken NC5-46 | 461.200.L46.000 | |||||||
| Lyndex-Nikken NC5-53 | 461.200.L53.000 | |||||||
| Lyndex-Nikken NC5-63 | 461.200.L63.000 | |||||||
| Lyndex-Nikken NC5-85 | 461.200.L85.000 | |||||||
| Lyndex-Nikken NC5-100 | 461.200.L90.000 |
For more information regarding this item (ForceCheck Sensor for Lyndex-Nikken NC5) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Wireless Chuck Force Sensor Manual
The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).
Wireless Sensor Operating Instructions
The ForceCheck wireless sensor measures the clamping force of power drawbars on machining centers. Designed for use with the ForceCheck Wireless Display (461.110).
Download or print PDF data sheet for instruction manual.
Wireless Chuck Force Sensor Sets
Suitable for measuring RPM and force at the same time. These are complete sets that include sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case. Contact us for custom sizes and multi-adapter sets.
ForceCheck Hydraulic Tool Holder Force Gauges
Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece.
ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve.
Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.
Wireless Gauge Display Manual
The ForceCheck Wireless Display is designed for use in conjunction with ForceCheck wireless sensors. The display shows the force, RPM, or other output transmitted by a connected sensor.
HSK Taper Wireless Force Measuring Bars
Wireless measuring adapters have the option of coming with or without the tool change groove. Wireless adapters can be retrofitted for quick inspection or designed for integrated use; ask us more for details.
Chuck Force Sensor Extensions and Accessories
Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
Submit your feedback